Connecting to an External Source |
| Connecting the Loudspeakers |
|
|
|
The auxiliary input can be used to take advantage of the sound GB quality of your MICRO component compact system when listening
to other sources.
Example: | A television |
| A video disc player |
| A |
To connect the external source, the source must have an audio output. In addition, you need an RCA connection cable.
1Set the system to standby mode and disconnect it and the external source from the main.
2Connect the audio cable to the rear of the micro component compact system.
Connect the... | To the connector marked... |
Red jack | R (right) |
White jack | L (left) |
For optimum sound quality, do not invert the right and left channels.
3Plug the system back into the main socket and press On/Standby to switch it on.
4Select the AUX function by pressing FUNC. button. Result: AUX is displayed.
5Switch the external source on.
6Adjust the volume and balance as required:
Volume
Equalizer
CD Digital Out Jack
This unit can output CD digital sound signals through this jack. Use an optical cable to connect digital audio equipment. (DAT deck, MD recorder, etc.).
Remove the dust cap (1) from the CD DIGITAL OUT jack. Then, connect an optical cable plug to the CD DIGITAL OUT jack.
(1) |
When the CD DIGITAL OUT jack is not being used
Attach the supplied dust cap.
The loudspeaker connector terminals are located on the rear of the system.
1Press and hold the clamp of the speaker terminal on the rear of the unit.
2Insert the end of the speaker cord into the terminal.
Match the polarity (colors): Red (+) to red (+) and black
3Release the finger from the clamp.
Use only speakers with the same speaker impedance as indicated by the speaker terminals on the rear of the unit.
(Right Speaker) | (Left Speaker) |
Directions in Installing Speaker
◆Installation in a place near heating apparatus, under direct lay of light or with high humidity may cause performance degradation of the speaker.
◆Do not install on the wall or on a high place of pole or other unstable place to prevent any safety accident caused by falling of the speaker.
◆Do not take the speaker apart from TV or computer monitor. The speaker near the TV or computer monitor may influence the quality of the screen display.
8