Programming the Order of Playback

(This function is not only available during playback of an MP3-CD.)

The order of the track desired to listen

The track not desired to listen

A maximum of up to 24 order of tracks desired to listen may be programmed.

Before selecting the track, the CD player should be stopped.

This function may be used simultaneously with the CD Repeat function.

1	If the CD function is selected, stop the player by pressing				button .


2	Load the selected CD.
3	Press Program/SET.
	Result: The following indications are displayed:
	(01 = Program no., DI = Disc no., – – = Track no. on the disc)
4	Select the required track by turning the Multi Jog knob:
	To the left to move back through the tracks
	To the right to move forward through the tracks
5	Press Program/SET to confirm your selection.
	Result: The selection is stored and			is displayed.
6	To select other tracks, repeat Steps 3 to 5.
7	Press CD (	) to listen to the track selection in the order programmed.


8
	To...			Turn the Multi Jog knob...
	Listen to the current track again			One notch to the left
	Listen to the previous track			Two notches to the left
	Listen to the next track			One notch to the right
	Skip forwards or backwards one			The appropriate number of
	or more tracks			notches to the right or to the left
9	To cancel the selection, press		button .

Once if the compact disc player is stopped

Result: PRGM is no longer displayed.

If you open the compartment, the selection is cancelled.

You can also use the / buttons to select the required tracks in step 4, 8.

TUNE/CD

VOL.

Checking or Changing Programmed Tracks

You can check or change your selection of tracks at any time.

1	Press	once if you have started listening to the selection.


2	Press Program/Set.
	Result: The following indications are displayed:

(01 = Program no., – – = Track no. on the disc)

If you have already programmed 24 tracks, Check is displayed instead of PR when you press Program/Set.

3	Press Program/Set one or more times until the track to be changed
	is displayed.
4	Press	/		or turn Multi Jog to select a different track.


5	Press Program/Set to confirm your change.
6	Press CD (		) to start listening to the selection.


	Result: The first track selected is played.