Samsung MMZB7TH/SAM Programming the Order of Playback, Checking or Changing Programmed Tracks

Programming the Order of Playback

(This function is not only available during playback of an MP3-CD.)

You can decide:

The order of the track desired to listen

The track not desired to listen

A maximum of up to 24 order of tracks desired to listen may be programmed.

Before selecting the track, the CD player should be stopped.

This function may be used simultaneously with the CD Repeat function.

1	If the CD function is selected, stop the player by pressing						button .
2	Load the selected CDs.
3	Press Program/Set.
	Result: The following indications are displayed:
		(01 = Program no., -- -- = Track no. on the disc)
4	Select the required track by pressing:
		to move back through the tracks
5		to move forward through the tracks
	Press Program/Set to confirm your selection.
	Result: The selection is stored and is displayed.
6	To select other tracks, repeat Steps 4 to 5.
7	Press CD (		) to listen to the track selection in the order programmed.
8
	To...			Press...
	Listen to the current track again				once
	Listen to the previous track				twice
	Listen to the next track				once
	Skip forwards or backwards				or	the appropriate
	one or more tracks			number of times
9	To cancel the selection, press			button.

Once if the compact disc player is stopped

Result: PROGRAM is no longer displayed.

If you open the compartment, the selection is cancelled.

CD SYNC.	REV.			RDS
	Mode		Display PTY
1, 9		CD
3,5			7	+10
Repeat
Program/	VOL.			Band
Set				4,8

Tune/CD

Checking or Changing Programmed Tracks

GB

You can check or change your selection of tracks at any time.

1	Press	once if you have started listening to the selection.
2	Press Program/Set button twice.
	Result: The following indications are displayed:

(01 = Program no., – – = Track no. on the disc)

If you have already programmed 24 tracks, Check is displayed instead of P when you press Program/Set.

3	Press Program/Set one or more times until the track to be changed
	is displayed.
4	Press	or	to select a different track.
5	Press Program/Set to confirm your change.
6	Press CD (		) to start listening to the selection.
	Result: The first track selected is played.

TUNER		Open/Close
Band
Down	Tuning	Up
	Mode
CD		Demo

4	1	4
TAPE	Volume

AUX			Sound
	Rec/Pause	REV.Mode	Mode

		TAPE
CD SYNC.	REV.		Display	RDS
	Mode			PTY
	1	CD
Repeat			6	+10
2,3,5
Program/		VOL.		Band
Set				4
		Tune/CD

4,8

Mode

VOL.

	Mode
4	VOL.

13