Selecting a Stored Station

Searching for and Storing the Radio Stations (continued)

7 If you do not want to store the radio station found, revert to Step 4 and search for another station.

Otherwise:

aPress Memory.

Result: The PRGM is displayed for a few seconds.

bPress Tuning Down and Up or turn Multi Jog to assign a pro- gramme number between 1 and 15.

cPress Memory to store the radio station.

Result: PRGM is no longer displayed and the station is stored.

8 To store any other radio frequencies required, repeat Steps 3 to 8.

The PROGRAM function can be used to assign a new station to an existing programme number.

You can listen to a stored radio station as follows:

1 Switch the system on by pressing On/Standby.

2 Select the TUNER function by pressing Tuner .

3 Select the required frequency band by pressing Tuner (Band) on the remote control or TUNER (Band) again on the front panel.

4 Press , button on the front panel of the unit, or the

, button on the remote control until “PRESET” is displayed.

5 Turning Multi-jogon the front panel left or right until the desired

station is found or press	,	to select the desired station.
station is found or press	,	to select the desired station.
or

Select the desired station by pressing the station number stored,

using the

button on the remote control.

Result: The desired station is now received.

In Tuner Mode

In manual tuning mode, you can use Multi Jog or , button to manual search a radio station.

In manual tuning mode, you can press and hold down

2,3

4 4

, button on the front panel or press and hold down

Tuning or button on the remote control to auto search a radio station.

During Tuner auto searching,press , or button on the front panel or turn Multi Jog to stop auto searching.

In Preset tuning mode, you can use Multi Jog or , button to search a stored radio station.

Improving Radio Reception

You can improve the quality of radio reception by:

Rotating the FM or AM(MW) aerial

Testing the positions of the FM and AM(MW) aerials before fixing them permanently

If reception from a specific FM radio station is poor, press MO/ST on the remote control to switch from stereo mode to mono. The quality of the sound will be improved.