Inserting the Battery into the Remote Control
1 |
2 |
You must insert or replace the remote control battery when:
◆You purchase the air cleaner.
◆The remote control does not work properly.
Note ◆ Always direct the remote control towards the Remote Control Sensor on the air cleaner when operating it from a distance.
◆When you press a button on the remote control and the air cleaner makes a ringing sound, it means the function has been chosen.
◆If other electric appliances are affected by the remote control, consult an authorized service personnel.
1Push the section marked with the dotted lines towards the direction of the arrow(①), and then pull out the battery case in the direction of the arrow(②).
2Insert the battery(Lithium Ion), after confirming polarities of the battery :
◆+ side on the battery with the + side on the remote control.
◆- side on the battery with the - side on the remote control.
3Slide back the battery cover until it clicks.
Keeping the Remote Control
Keep the remote control in the remote control case of the air cleaner when it is not being used.
As shown in the figure, place the remote control in the remote control case.