Selecting Energy Saving Mode
If you wish to save energy when using your air conditioner, select the
Energy saving mode with the Energy saving button.
1If necessary, press the 
(On/Off) button.
Result: ◆ The operation indicator on the indoor unit lights up.
◆ The air conditioner starts up in the mode selected when the unit was last used.
◆ The indoor unit beeps.
IMPORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being:
◆Plugged in
◆Stopped
lt will start up normally after three minutes.
2 Select COOL mode by pressing the 
button.
Note You can select the Energy saving mode only in the COOL mode.
3 Press the | button. |
Result: | ◆ The indoor unit beeps. |
◆The air conditioner runs in the Energy saving mode.
◆The outer air flow blade moves up and down.
◆To stop the Energy saving mode, press the 
again.
4To adjust the temperature, press the 
button one or more times
until the required temperature is displayed. Possible temperatures are between 26°C and 30°C inclusive.
Note If you want to adjust temperature under 26°C, cancel the
Energy saving mode before adjusting the temperature.
5 To select the fan speed, press the 
button one or more times until the required setting is displayed.
6 To control the direction of the air flow, refer to page 15.