operating basic function
TURNING THE AIR CONDITIONER ON AND OFF
Press the Power 
button on the remote control.
You will hear a ringing sound and the air flow blade will move up and down automatically when the air conditioner is properly on.
The air conditioner will operate in the most recent operation mode used or Auto mode.
When you turn off the air conditioner, air flow blade will stop moving and remain closed.
Turning on/off your air conditioner without the remote control.
You can operate your air conditioner by pressing the Power 
button on the right bottom side of the air conditioner.
SELECTING OPERATION MODE
Auto
In Auto mode, the air conditioner will automatically set the temperature and fan speed depending on the room temperature detected by the room temperature sensor.
1.Turn on the air conditioner.
Press the Power 
button on the remote control.
2. Set the operating mode.
Press the Mode button on the remote control until Auto mode and Auto fan speed indicator appear on the remote control display.
The air conditioner will automatically set the operation mode to Cool depends on the room temperature.
Each time you press the Mode button, the mode will change in order of Auto, Cool, Dry and Fan.
3.Adjust the temperature (if you need to increase or
decrease the room temperature).
Press the Temp or button on the remote control to increase or decrease the desired temperature.
You can set the desired temperature between the range of 16˚C~30˚C.
You can increase/decrease the temperature by 1˚C.
•While you are using the remote control, make sure correct indicator which matches your selection appears on the remote control display.
•Air flow can be adjusted manually. (See page 18 for instructions.)
14_ operating
AS09E series_IB_E_30922A_10.13.09.indd 14