Solving Common Problems, COOL, Heat | Samsung SH09VAD specs

Solving Common Problems

Before contacting the after-sales service, perform the following simple checks. They may save you the time and expense of an unnecessary call.

Problem		Explanation/Solution

The air conditioner does not	◆ Check that the breaker used for the air conditioner is switched on.
operate at all	◆ Check that the 5 Way indicator on the indoor unit is on;
	if necessary press the	(On/Off) button on the remote control.

◆Check whether the TIMER indicator on the indoor unit is switched on. If so:

-Wait until the switch-on time is reached and the air conditioner starts up automatically

-Cancel the timer (see pages 18 and 19 for further details)

The air conditioner does not	◆ Check that there are no obstacles between you and the indoor unit.
operate with the remote control	◆ Check the remote control batteries.
	◆ Check that you are close enough to the indoor unit (seven metres/
	yards or less).

No beep is heard when you press		◆ Check that you are pointing the remote control at the remote control
the	(On/Off) on the remote	sensor in the right of the indoor unit.
control		◆ Replace the remote control batteries if necessary.

The air conditioner does not cool		◆ Check that the correct operating mode has been selected (AUTO,
or heat		COOL, HEAT).

◆The room temperature may be too low or too high.

◆Dust may be blocking the air filter guard; refer to page 22 for cleaning instructions.

◆Check that there is no obstacle in front of the outdoor unit.

When heating, the required room	◆ Check that the required temperature has been set correctly.
temperature is never reached and	◆ Increase the fan speed.
the air conditioner frequently stops	◆ If the air flow is directed upwards, use the remote control to direct it
	downwards.

The fan speed does not change	◆ Check that the operating mode is set to COOL, HEAT or FAN ; in the
when you press the FAN button	AUTO mode, the fan speed changes automatically and in the
	DRY mode, it is set to AUTO.

The air flow direction does not	◆ Check that the air conditioner has been switched on; if necessary,
change when you press the	press the	(On/Off) button on the remote control.
SWING button

The timer is not correctly triggered	◆ Check that the timer has been programmed correctly; see pages 18
	and 19.

Odours are permeated in the room	◆ Air the room.
during air conditioning

ENGLISH

E-23