Selecting Auto Mode
ENGLISH
You can select Auto mode if you want to cool or heat your room automatically.
You can adjust the temperature in this mode.
1 Press the 
(On/Off) button.
Result: The operation indicator on the indoor unit lights up.
The air conditioner starts up in the mode you selected last.
The indoor unit beeps.
2 Press the 
button on the remote control until 
is displayed.
Result: | The indoor unit beeps each time you press the | button. |
The air conditioner runs in Auto mode.
Auto mode cools or heats the room depending on the set temperature.
The air conditioner changes from Cool or Heat mode automatically, depending on the current temperature.
Note You can change modes at any time.
3 Press the 
button to adjust the temperature until the required temperature is displayed.
You can set the temperature between 16°C and 30°C.
Result: Each time you press the 
button: - The temperature adjusts by 1°C
- The indoor unit beeps
4 Press the 
button to select the fan speed until the required setting is displayed.
Automatic (rotated : 
)
Low
Medium
High
Result: Each time you press the 
button, the indoor unit beeps.
5To control the airflow direction, refer to page 21.