Samsung SH18APJEX, SH12AP4EX, SH07AP4EX, SH09AP4EX, SH24AP6EX manual Heating Your Room

Page 11
IMPORTANT

Heating Your Room

ENGLISH

You must select the Heat mode if you wish to adjust the:

Heating temperature

Fan speed when heating

1 If necessary, press the

(On/Off) button.

Result: The operation indicator on the indoor unit lights up.

The air conditioner starts up in the mode selected when the unit was last used.

The indoor unit beeps.

The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being:

Plugged in

Stopped

It will start up normally after three minutes.

2 If the

is not displayed at the top of the remote control, press the

button on the remote control one or more times until it appears.

Result:

The indoor unit beeps each time you press the

button.

 

The air conditioner runs in HEAT mode.

 

Note

You can change modes at any time.

 

3To adjust the temperature, press the button one or more times until the required temperature is displayed.

Possible temperatures are between 16°C and 30°C inclusive.

Result: Each time you press the button:

-The temperature is adjusted by 1°C

-The indoor unit beeps

The air conditioner starts heating, provided that the room temperature is lower than the desired temperature (selected temperature+3°C).

If the room temperature reaches the set temperature, the air conditioner stops heating, but the fan is still operating.

4 Select the fan speed by pressing the

button one or more times

until the required setting is displayed:

 

Automatic (rotated :

)

Low

 

Medium

 

High

 

Result: Each time you press the

button, the indoor unit beeps.

For the first three to five minutes, the fan operates very slowly until the air has been sufficiently warmed. Once the correct temperature has been reached, the fan is automatically set to the required speed.

5To control the direction of the air flow, refer to page 17.

E-11

Image 11
Contents USER’S Manual Safety Precautions Contents Indoor Unit View of the UnitOutdoor Unit Remote Control Buttons and Display Getting Started Inserting the Remote Control Batteries Selecting the Automatic Operating Mode Cooling Your Room Heating Your Room Changing the Room Temperature Quickly Removing Excess Humidity Airing Your Room Selecting Energy Saving Mode Generating Anions Adjusting the Air Flow Direction Horizontally Adjusting the Air Flow Direction VerticallyTo Cancel the On Timer Setting the On TimerTo Cancel the Off Timer Setting the Off TimerTo Cancel the Sleep Timer Setting the Sleep TimerTopic Recommendation Operating RecommendationsOperating Your Air Conditioner Without the Remote Control Temperature and Humidity RangesSolving Common Problems Cleaning Your Air Conditioner Cleaning Deodorizing and Bio Filters Option Electronics
Related manuals
Manual 26 pages 47.65 Kb Manual 26 pages 53.07 Kb Manual 26 pages 16.5 Kb Manual 26 pages 50.33 Kb Manual 26 pages 7.1 Kb