operating basic function
SELECTING OPERATION MODE
Heat
The air conditioner heats as well as cools. Warm your room with this versatile appliance in the cold of winter.
1. Turn on the air conditioner. Press the Power 
button on the remote control.
2. Set the operating mode.
Press the Mode button on the remote control until Heat mode indicator appears on the remote control
display. The air conditioner operates in Heat mode and warms
your room.
Each time you press the Mode button, the mode will change in order of Auto, Cool, Dry, Fan and Heat.
3. Set the temperature.
Press the Temp or button on the remote control to increase or decrease the desired temperature.
You can set the desired temperature between the range of 16˚C~30˚C.
You can increase/decrease the temperature by 1˚C.
4.Set the fan speed.
Press the Fan or button on the remote control to set the desired fan speed.
If room temperature reaches desired value, heating will stop for a while.
• Each time you press the Fan or button, fan speed will change in order of Auto, Silence,Low, Medium and High.
• Fan may not operate for about 3~5 minutes at the beginning to prevent any cold blasts while the air conditioner is warming up.
•Air flow can be adjusted manually (see page 19 for instructions).
•Since the air conditioner heats the room by taking heat energy from outdoor air, the heating capacity may decrease when outdoor temperature is extremely low.
Use an additional heating appliance in combination with the air conditioner if you feel the air conditioner heats insufficiently.
•Press the Temp/Humi button on the remote control to check the temperature and humidity level in a room.
•Silence mode( 
) makes the noise quieter during operating the indoor unit in the Heat mode.
18_ operating