Selecting Energy Saving Mode
If you wish to save energy when using your air conditioner, select the
Energy saving mode with the Energy saving button.
1If necessary, press the 
(On/Off) button.
Result: ◆ The operation indicator on the indoor unit lights up.
◆The air conditioner starts up in the mode selected when the unit was last used.
◆ The indoor unit beeps.
IMPORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being:
◆ Plugged in ◆ Stopped
lt will start up normally after three minutes.
2 Select COOL mode by pressing the 
button.
Note You can select the Energy saving mode only in the COOL mode.
3 Press the | button. |
Result: | ◆ The indoor unit beeps. |
| ◆ The air conditioner runs in the Energy saving mode. |
| ◆ The outer air flow blade moves up and down. |
◆To stop the Energy saving mode, press the 
button again.
4 To adjust the temperature, press the 
button one or more times until the required temperature is displayed. Possible temperatures are between 26°C and 30°C inclusive.
Note If you want to adjust temperature under 26°C, cancel the
Energy saving mode before adjusting the temperature.
5To select the fan speed, press the 
button one or more times
until the required setting is displayed.
6To control the direction of the air flow, refer to pages 16 and 17.