Energy-Saving Operation
The smart
For the multi system, this function is not supported but the hours used are displayed.
Electricity consumption check
Use the Usage function to check the amount of electricity consumed by using the air conditioner. The amount consumed is displayed on the indoor unit display for a few seconds, and the set indoor temperature appears.
In operation ► ► ►
Select Usage. ►
The value range displayed is between 0.1 kWh and 99 kWh. Electricity consumption is calculated from the moment the air conditioner turns on. The value is reset when the air conditioner turns off.
NOTE
•The usage shown on the indoor unit display may slightly differ from the amount of electricity actually consumed.
•You can view electricity consumption only when the air conditioner is operating.
For the multi system, this function is not supported.
Single userfunction
Use the Single user function to reduce electricity consumption while staying cool or warm. You can select this function in the Cool and Heat modes.
In the Cool or Heat mode ► ► ►
Select Single user. ►
For ARTTMSWXTTmodel
In the Cool or Heat mode ►
NOTE |
|
• When the Single user function starts, the | pattern appears |
on the remote control for a few seconds, and vertical air swing begins
automatically.
•After selecting the Single user function, you can change the set temperature (24 °C to 30 °C in the Cool mode, 16 °C to 30 °C in the Heat mode), fan speed, and vertical air flow direction.
24English
5/2/2017 2:43:48 PM