Selecting the Automatic Operating Mode

ENGLISH

You can start the air conditioner in Automatic mode from your remote control. In the Automatic mode, the standard temperature and the opti- mum fan speed is selected automatically. You can adjust the standard temperature but not the fan speed.

1 If necessary, press the (On/Off) button.

Result: ◆ The operation indicator on the indoor unit lights up.

◆The air conditioner starts up in the mode selected when the unit was last used.

◆The indoor unit beeps.

IMPORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being:

◆Plugged in

◆Stopped

lt will start up normally after three minutes.

2 If the is not displayed at the top of the remote control,

press the button on the remote control one or more times until it appears.

Result:	◆	The indoor unit beeps each time you press the	button.
	◆	The air conditioner runs in AUTO mode.

Note You can change modes at any time.

3To adjust the standard temperature (The air conditioner automatically set the standard temperature by the current room temperature.),

press the button one or more times.

SET TEMP.	SET TEMP.	-	SET TEMP.	SET TEMP.
-2°C	-1°C	Standard temperature	+1°C	+2°C
< When you feel hot >			< When you feel chilly >

E-9