troubleshooting & error codes
TROUBLESHOOTING
PROBLEM | SOLUTION |
|
|
What should I do if the oven | • The oven may not be switched on. Switch the oven on. |
doesn’t heat up? | • The clock may not be set. Set the clock (see section “Time |
| Setting”). |
| • Check to see if the required settings have been applied. |
| • A household fuse may have blown or a circuit breaker may |
| have tripped. Replace the fuses or reset the circuit. If this |
| happens repeatedly, call an authorised electrician. |
What should I do if, even | • | There may be problems with the internal electrical | ||
though the oven function |
| connections. Call your local service centre. | ||
and temperature have been |
|
|
| |
set, the oven does not heat |
|
|
| |
up? |
|
|
|
|
|
|
|
|
|
What should I do if an error | • | There is a fault in the internal electrical circuit connection. Call | ||
code appears and the oven |
| your local service centre. | ||
does not heat up? |
|
|
| |
|
|
|
|
|
What should I do if the time | • | There was a power failure. Set the clock (see section “Time | ||
display is blinking? |
| Setting”). |
| |
|
|
|
|
|
What should I do if the oven | • | The oven light is faulty. Replace the oven light bulb (see | ||
light doesn’t illuminate? |
| section “Bulb Exchange”). | ||
|
|
|
|
|
What should I do if the | • | Following use, the oven’s fan runs until the oven has cooled | ||
oven’s fan is running |
| down. Call your local service centre if the fan continues to | ||
without having been set? |
| run after the oven has cooled down. | ||
|
|
|
|
|
ERROR CODES |
|
|
| |
|
|
|
|
|
CODE | PROBLEM |
|
| SOLUTION |
|
|
| ||
| An error of the oven may cause low | Call local SAMSUNG service centre. | ||
| performance and problems in safety. |
| ||
| Stop using the oven immediately. |
| ||
|
|
|
| |
| SAFETY SHUTOFF |
| Turn oven off and remove food. | |
| Oven has continued operating at set | Allow oven to cool before using again. | ||
| temperature for prolonged time. |
| ||
|
|
| ||
| If you did not select an appropriate | Select the correct temperature for the | ||
| temperature for the mode. | mode. (see section “Using the fast | ||
|
|
|
| preheating mode”) |
|
|
|
|
|
1) * refers to all numbers or characters.
English - 16
|