IN-LINE Connector, Wiring the Connectors | Lightolier 26650 specification

INSTRUCTION SHEET NO.

IS:26650

A0397

Page 2 of 2

Installation Instructions for Recessed ProSpec™, In-Line, "L",

"T", and "X" Connectors /Circuit Diagrams

For use with Recessed ProSpec™ Track System Only.

WIRING THE CONNECTOR(S)

Use 12 ga. solid copper wire when feeding the connector(s). Each circuit is rated for 120V, 60Hz, 20 AMPs.

NOTE: The "L", "T", "X", and In-Line Connector allow for multiple circuits to be introduced into them. The Connectors are not polarized and can be installed into the track in any orientation. Therefore, identification of the circuits during wiring needs to be controlled by the installer or electrician. The brass screw terminals are for the hot

Circuit 2 Neutral 2

Use 12 ga. solid copper wire for feed connections including ground.

Circuit 1

Neutral 1

leads. The silver screw terminals are for the neutral leads, and the terminals marked "GND" are for the ground. The individual circuit(s) are arranged vertically. (See diagrams). The "L" and In-Line Connectors are pre-wired. These wires may be removed if the wiring needs to be different. Loosen the screw terminals and remove the wires.

1.Form the wires to the screw terminals, strip the insulation back 1/2".

2.Slip the wire under the terminal screw head. Tighten all screw terminals when wiring is completed.

3.Snap bottom cover onto the connector to cover the wires.

FIG. 4

Power Terminals

Neutral

Terminals

Ground Terminal

1
Circuit	2
Circuit

.50

Two wires may be attached to one screw terminal.

IN-LINE

"X" CONNECTOR

Typical Circuit

Identification

Neutral Terminal

Circuit

GND Ground

GND Cir-2 N-2

Cir-1 N-1

GND

Cir-2 N-2

Cir-1 N-1

"T" CONNECTOR

GND Cir-2 N-2

Cir-1 N-1

GND Cir-2 N-2

"L" CONNECTOR

Cir-1 N-1

26650 specifications

The Lightolier 26650 series represents a significant advancement in lighting technology, crafted to meet the diverse needs of both commercial and residential spaces. Known for their innovative design and exceptional performance, the Lightolier 26650 units have gained widespread popularity among architects, interior designers, and consumers alike.

One of the standout features of the Lightolier 26650 is its energy efficiency. Equipped with cutting-edge LED technology, these fixtures consume minimal power while delivering high-quality illumination. This not only reduces electricity bills but also contributes to a lower carbon footprint, making them an environmentally friendly choice. The models in this series often come with various lumen output options, allowing users to select the right brightness based on the specific application.

The Lightolier 26650 also boasts a sleek and modern design, making it suitable for a variety of settings, from offices to retail spaces and even homes. The unobtrusive profile allows these fixtures to blend seamlessly into different architectural styles while providing an aesthetically pleasing solution for lighting needs.

Another key characteristic is the versatility in mounting options. The Lightolier 26650 can be installed in multiple configurations, including recessed, surface-mounted, or pendant styles. This flexibility makes it easier for designers to adapt the lighting to the unique dimensions of a room or the ambiance of a specific area.

The Lightolier 26650 series incorporates advanced technologies such as dimming capabilities and smart controls. Many models are compatible with various dimmer switches, providing users with the ability to adjust brightness levels according to their preferences. Furthermore, integration with smart home systems allows for remote control and scheduling, enhancing convenience and energy management.

Durability is another important aspect, as the Lightolier 26650 is built to withstand demanding environments. The materials used in its construction are designed to resist wear and tear, ensuring longevity and consistent performance. Coupled with a long lifespan typical of LED technology, these fixtures reduce the need for frequent replacements, ultimately saving time and money.

In summary, the Lightolier 26650 series combines energy efficiency, design excellence, versatile mounting options, advanced technologies, and durability. These features not only make it an exceptional choice for effective lighting solutions but also contribute to its growing reputation in the industry. As lighting technology continues to evolve, the Lightolier 26650 stands out as a model of modern innovation, transforming spaces with elegance and functionality.