FUCTIONS OF WATER DISPENSER(OPTION)
With the water dispenser, you can obtain chilled water easily without opening the refrigerator door.
HOW TO USE WATER DISPENSER
Lift up and pull out the water tank.
• Hold the handgrips on both sides to lift out the water tank.
• Clean the inside of water tank when using it for the first time.
Fill the water tank with water, ensuring that it is in a stable position, allowing for the extended water supply outlet.
•Fill with water up to 2.5l. If it is filled higher than this, it may overflow when the lid is closed.
•It is impossible to fill the tank with water while it is positioned in the refrigerator.
Round lid 
Water tank
Water spout
Method 1.
Fill the water lifting the round lid in the arrow direction to open.
Close the refrigerator door after fitting the water tank.
•Confirm that the water spout is outside after closing the door.
Method 2.
Please fill the water after holding and lifting the large lid to open it.
Press down the water supply lever after placing a
cup on platform. | Water supply lever |
• Place the cup deep inside to touch the back wall.
• Check that the locking device is set to "open". Water can only be dispensed on this setting.
• Throw away 2~3 cups of water when using the water dispenser for the first time after installation.
• Approximately 1 0~1 5 cups of water are available.
When the water dispenser is not in use.
After removing water tank, tightly insert the cap for sealing in place of water spout, so that cool air escapes.
10