Switching Your PDP Display On and Off
The mains lead is attached to the rear of your PDP Display.
1 | Plug the mains lead into an appropriate socket. | Front of the PDP Display | ||
| Result: | The Standby indicator on the front of the PDP Display | ||
|
|
| lights up. |
|
| ➢ The main voltage is indicated on the rear of the PDP | |||
|
| Display and the frequency is 50 or 60Hz. |
| |
2 | Press the “ | ” button on the front of the PDP Display (or the ON | ||
| ( | ) button on the remote control) to switch the PDP Display on. | ||
3 | To switch your PDP Display off, press the “ | ” button again (or | ||
| the OFF ( | ) button on the remote control). |
| |
Choosing Your Language
When you start using your PDP Display for the first time, you must select the language which will be used for displaying menus and indications.
1Press the MENU ( 
) button.
Result: The main menu is displayed.
2Press the … or † button to select Setup. Result: The Setup menu is displayed.
3Press the ENTER ( 
) button.
4Press the … or † button to select Language. Press the ENTER ( 
) button.
Result: The available languages are listed.
5Select the appropriate language by pressing the … or † button. Press the ENTER ( 
) button.
6Press the EXIT button to exit.
Setup
Time
Language : English
PC
Move | Enter | Return |
| Setup |
|
Time | English |
|
|
| |
Language | : English |
|
| Français |
|
PC | Deutsch |
|
|
| |
| Italiano |
|
| Español |
|
| Português | |
| † |
|
Move | Enter | Return |
English - 15