Maintenance
Door reversal (applicable models only)
Reversing the door must be performed by
WARNING
•Reversing failure or property damage that may occur by unapproved agencies will not be covered by the Warranty.
•Make sure that the refrigerator is disconnected from the power source before doing the reversal.
•You must wait for at least an hour after door reversing is complete. This is to prevent electric shock that could occur.
Tools required (not provided)
Phillips screwdriver | 10 mm spanner | |
|
| (for top hinge shaft) |
8 mm socket wrench | 12 mm spanner |
(for bolts) | (for bottom hinge shaft) |
Accessories
The appearance of the accessories listed below may differ with the model.
Maintenance
Hinge cover (L) | Space cover (L) |
CAUTION
Throughout the entire reversing procedure, keep all the small parts (screws, caps, etc.) of the refrigerator away from children or infants for safety reasons.