After reading this section, keep it in a safe place for future reference.
SEVERE WARNING SIGNS FOR TRANSPORTATION AND
WARNING SITE
• When transporting and installing the appliance, care should be taken to ensure that no parts of the refrigerating circuit are damaged.
-Refrigerant leaking from the pipe work could ignite or
cause an eye injury. If a leak is detected, avoid any naked flames or potential sources of ignition and air the room in which the appliance is standing for several minutes.
•In order to avoid the creation of a flammable
•Never start up an appliance showing any signs of damage. If in doubt, consult your dealer. The room where the refrigerator will be sited must be 1m³ in size for every 8g
of R600a refrigerant inside the appliance. The amount of refrigerant in your particular appliance is shown on the identification plate inside the appliance.
SEVERE WARNING SIGNS FOR
WARNING INSTALLATION
• Do not install the refrigerator in a damp place or place where it may come in contact with water.
-Deteriorated insulation of
safety information _03