Samsung AF24FSSDAWKNEU manual Goodsleep operation, ENGLISH-22

Page 22

good'sleep operation

For a comfortable sleep, the air conditioner will operate in Fall asleep Sound sleep Wake up from good’ sleep mode.

When the air conditioner is on and in cool mode.

 

1.

Press the good'sleep button on the remote controller to select the good'sleep mode.

 

 

good'sleep indicator appears and Off timer indicator starts blinking on the remote

 

 

 

 

 

 

WPS

Wi-Fi

controller display.

Lighting

2. Press the good'sleep button to set the time.

You can set the time in half hourly units from 30 minute ~ 3 hours and hourly units from 3 hour ~ 12 hours.

The operation hour can be set to minimum 30 minutes and maximum 12 hours.

Default operation hour is set to 8 hours.

3. Press the Set/Cancel button to activate it.

Off timer indicator stops blinking and set time will be displayed.

/ icon appears in the display of the indoor unit and good'sleep mode starts operating.

If you don't press the Set/Cancel button to start the good'sleep mode within 10 seconds, the operation is canceled so you should check the Off indicator on the remote controller display and / icon on the indoor unit display.

Cancel Press the Set/Cancel button once again.

You can set the desired temperature by 1 ˚C within the range of 18˚C~30 ˚C.

Fan speed will be adjusted automatically according to the good'sleep mode.

Air flow direction will be adjusted automatically according to the good'sleep mode.

ENGLISH-22

Image 22
Contents Air Conditioner Smart sensor Features of your new air conditionerSeasons of effective cleaning ENGLISH-2Contents Injury or death Safety precautionsImportant safety symbols and precautions Injury or property damageENGLISH-5 For Installation Caution ENGLISH-6For Using ENGLISH-7ENGLISH-8 Do not drink the water from the air conditioner Do not place objects or devices under the indoor unitDo not operate the appliance with wet hands ENGLISH-9Do not clean the inside of the air conditioner by yourself ENGLISH-10Checking before use Cool mode, set the appropriate desired temperatureUse extra heating apparatus during heat mode Make sure that curtain does not block the air inletOperation ranges Auxiliary power switchAuxiliary power switch NFB, ELB, etc Functions available for each modelModel specification Weight and dimension ENGLISH-13ENGLISH-14 DisplayButtons on control panel DisplayENGLISH-15 Operation with control panel Checking the name of the partsENGLISH-16 Checking the remote controller ENGLISH-17Checking the remote controller ENGLISH-18Basic operation ENGLISH-19ENGLISH-20 Press the button to set the operation modePress the button to adjust the desired temperature Solomode RemarksTurbo operation ENGLISH-21Goodsleep operation When the air conditioner is on and in cool modeENGLISH-22 Temperature and fan speed changes in goodsleep mode ENGLISH-23Setting the On/Off timer ENGLISH-24ENGLISH-25 Air conditioner will turn on after 3 hoursSmart sensor operation Press the button during Cool modeTo adjust the lighting level of an indoor unit Lighting functionQuiet operation Auto clean operationENGLISH-27 Cleaning the outdoor unit heat exchanger Cleaning the air conditionerCleaning the indoor unit ENGLISH-28ENGLISH-29 Cleaning the Full HD filterRemove dust with a vacuum cleaner or running water Pull out the Full HD filter in the arrow directionENGLISH-30 Cleaning the Zero filterDry the filter in a ventilated area Troubleshooting ENGLISH-31Clean the Zero filter and Full HD Filter if they are dirty Button to select other modeController after setting the time Performance may decreaseConditioner, push the Zero filter to the end Error is indicatedContact a service center Not worry about fire with thisOpen Source Announcement ENGLISH-34Memo ENGLISH-35ENGLISH-36 ENGLISH-37 Questions or COMMENTS?
Related manuals
Manual 34 pages 32.16 Kb Manual 1 pages 26.59 Kb