Samsung LS19MJSTSE/EDC manual Screen shows strange colors or just black and white

Page 59

There is no image on the screen.

Is the power indicator on the monitor blinking at 1 second intervals?

85Hz, the display will work properly but the "Not Optimum

Mode","Recommended Mode 1280 x 1024 60Hz" message appears for one minute and then disappears.

Please change to the recommended mode during this one-minute period.

(The message is displayed again if the system is rebooted.)

The monitor is in PowerSaver mode.

press a key on the keyboard to activate the monitor and restore the image on the screen.

If there is still no image, press the 'Source' button.

Then press any key on the keyboard again to activate the monitor and restore the image on the screen.

Is the monitor connected

You may get a blank screen if you

using the DVI cable?

boot the system before you connect

 

the DVI cable, or disconnect and

 

then reconnect the DVI cable while

 

the system is running as certain

 

types of graphic cards do not send

 

out video signals.

 

Connect the DVI cable and then

 

reboot the system.

The screen shows strange colors or just black and white.

Is the screen displaying only one color as if looking at the screen through a cellophane paper?

Have the screen colors become strange after running a program or due to a crash between applications?

Check the signal cable connection. Make sure the video card is fully inserted in it's slot.

Reboot the computer.

The screen suddenly has become unbalanced.

Has the video card been set properly?

Have you changed the video card or the driver?

Have you adjusted the resolution or frequency to the monitor?

Set the video card by referring to the video card manual.

Adjust screen image position and size using the OSD.

Adjust the resolution and frequency at the video card.

(Refer to the Preset Timing Modes).

The screen can be unbalanced due to the cycle of the video card signals. Readjust Position by referring to the OSD.

The screen is out of focus or OSD cannot be adjusted.

LED is blinking but no images on the screen.

There are only 16 colors shown on the screen.

The screen colors

Have you adjusted the resolution or frequency on the monitor?

Is the frequency properly adjusted when checking the Display Timing on the menu?

Have the Windows colors been set properly?

Adjust the resolution and frequency of the video card.

(Refer to the Preset Timing Modes).

Adjust the frequency properly by referring to the video card manual and the Preset Timing Modes.

(The maximum frequency per resolution may differ from product to product.)

Windows ME/2000/XP:

Set the colors properly at the

Control Panel → Display → Settings.

Image 59
Contents SyncMaster 913BM Notational PowerUse only a properly grounded plug and receptacle Insert the power plug firmly so that it does not come looseInstallation Do not use a damaged or loose plugSet down the monitor carefully Do not drop the monitor when moving itKeep any heating devices away from the power cable Do not place the product on the floorDo not spray water or detergent directly on the monitor CleanDo not remove cover or back OthersNever insert anything metallic into the monitor openings Do not cover the vents on the monitor cabinetInch 48 cm 1280 X MagicRotation software Cable Sub Cable Power Cord Audio CableUnpacking Natural Color softwareCustom Sold separately DVI CableFront Rear Page DVI Connecting the MonitorRGB Attaching a Base Using the Stand Pivot Stand / Sliding StandClick Windows ME Driver Windows MEClick Windows XP/2000 Driver Windows XP/2000Microsoft Windows XP Operating System Installing the Monitor Driver ManualPage How to install Click Start , Setting , Control Panel Natural Color Microsoft Windows NT Operating SystemLinux Operating System How to install the Natural Color software Auto MagicBright Menu DescriptionMenu Picture Menu Description SourceColor Tone Color Control Gamma Brightness ContrastDescriptionPlay/Stop ColorOSD Coarse Fine Sharpness PositionLanguage Position Transparency Display Time SetupInformation Auto Source Image Reset Color ResetPage Overview Installation Page Installation Problems It is recommended using MagicTune in Windows 2000 or later OSD Mode Picture Tab Definition Image Tab Definition Option Tab Definition Support Tab Definition Page Color Calibration Page Uninstall Troubleshooting Symptom Check List Graphic card, visit our website to check Overview Installation Page Installation Problems System Requirements Interface Page Page Uninstall Troubleshooting Check List SymptomSolutions Screen shows strange colors or just black and white Control Panel → Display → SettingsRefer to the Connecting Your Answer Self-Test Feature CheckQuestion Useful Tips Signal Cable ResolutionInput Signal, Terminated Power SupplyVesa Mounting Interface Dimensions WxDxH/ WeightPower saving Power off Normal Mode State Power buttonHorizontal Frequency Preset Timing ModesPixel Clock Sync Polarity Display Mode Frequency MHz KHz HorizontalAustralia Brazil ServiceGermany United Kingdom PanamaTerms Class B For Better DisplayAuthority Suggestions for specific applications What is Image retention ?Power Off, Screen Saver, or Power Save Mode
Related manuals
Manual 75 pages 45.07 Kb Manual 76 pages 44.93 Kb Manual 74 pages 49.11 Kb Manual 69 pages 21.81 Kb Manual 78 pages 43.91 Kb

LS19MJSTSE/EDC specifications

The Samsung LS19MJSTSE/EDC is a versatile and sleek monitor designed to cater to various user needs, including everyday computing, gaming, and professional use. This model stands out for its blend of performance, efficiency, and stylish aesthetics, making it a prime choice for home or office setups.

One of the main features of the Samsung LS19MJSTSE/EDC is its display technology. The monitor is equipped with a 19-inch screen that boasts a resolution of 1366 x 768 pixels, providing clear and crisp visuals. The panel offers a bright and vibrant color rendition, thanks to its high brightness level and impressive contrast ratio. The wide viewing angles ensure that users can enjoy consistent color and image quality from different positions, making it ideal for collaborative work environments.

The design of the LS19MJSTSE/EDC is another highlight. With its slim profile and modern aesthetics, this monitor saves space while enhancing the look of any workspace. The thin bezels add to the immersive viewing experience, minimizing distractions and allowing users to focus on their tasks. Additionally, it is lightweight and easy to mount, offering flexibility in placement.

Samsung has integrated several advanced technologies to improve the overall user experience. The Flicker-Free technology helps reduce eye strain during prolonged use by eliminating flicker, while the Eye Saver Mode adjusts the blue light emission. These features make the monitor suitable for long hours of work, enabling users to maintain productivity without discomfort.

Connectivity options are also robust, with multiple ports available for various devices. The LS19MJSTSE/EDC typically includes HDMI and VGA ports, allowing users to connect laptops, desktop computers, and other peripherals easily. This connectivity ensures compatibility with a wide range of devices, facilitating seamless transitions between work and entertainment.

In summary, the Samsung LS19MJSTSE/EDC monitor combines a compact design with essential features and advanced technologies. With its excellent visual performance, ergonomic benefits, and versatile connectivity options, it stands out as a reliable choice for both home and professional use. Whether for everyday tasks, creative projects, or casual gaming, this monitor is designed to meet the demands of modern users while ensuring comfort and efficiency.