Samsung LS17PEASB/EDC, LS17PEASW/EDC manual Connecting Cables, Using the Stand, Folding the base

SyncMaster 732N

Model

Connecting Cables

Connect the power cord for your monitor to the power port on the back of the monitor.

Plug the power cord for the monitor into a nearby outlet.

Use a connection appropriate to the computer you are using.

Using the D-sub (Analog) connector on the video card.

- Connect the signal cable to the 15-pin, D-sub port on the back of your monitor.

[RGB IN]

Connected to a Macintosh.

- Connect the monitor to the Macintosh computer using the D-sub connection cable.

Turn on your computer and monitor. If your monitor displays an image, installation is completed.

Using the Stand

Folding the base

You can tilt the monitor upwards at an angle of 0° to18°.