![](/images/new-backgrounds/1235379/2353799x1.webp)
1)POWER S/W ON [ ] / OFF [O]
Switches the LCD Display On/Off.
2)POWER IN
The power cord plugs into the LCD Display and the wall plug.
3)REMOTE OUT/IN
You can use a wired remote control by connecting it to your monitor.
4)RS232C OUT/IN (RS232C Serial PORT)
MDC(Multiple Display Control) Program Port
5)DVI / PC / HDMI IN [PC/DVI/BNC AUDIO IN] (PC/DVI/BNC/HDMI Audio Connection Terminal (Input))
6)DVI / PC / HDMI IN [HDMI]
Connect the HDMI IN terminal at the back of your monitor to the HDMI terminal of your digital output device using a HDMI cable.
7)DVI / PC / HDMI IN [RGB] (PC Video Connection Terminal)
Using a
8)DVI / PC / HDMI IN [DVI(HDCP)] (PC Video Connection Terminal)
Using a DVI Cable
9)COMPONENT AUDIO IN
10)BNC/COMPONENT OUT [R/PR, G/Y, B/PB, H, V] (BNC/Component Connection Terminal (Output))
BNC (Analog PC) Connection: connecting the R, G, B, H, V ports
Component Connection: connecting the PR, Y, PB ports
11)BNC/COMPONENT IN [R/PR, G/Y, B/PB, H, V] (BNC/Component Connection Terminal (Input))