Radio Shack SCR-65 specifications Using AC or DC Power, Listening Safely, Traffic Safety

Page 3

cassette recorder stops operating properly, replace the batteries.

Warning: Dispose of old batteries promptly and properly. Do not burn or bury them.

Caution: If you do not plan to use the cas- sette recorder with batteries for a week or longer, remove the batteries. Batteries can leak chemicals that can destroy electronic parts.

USING AC OR DC POWER

You can power the cassette recorder with standard AC power using a 6V, 700 mA AC or DC adapter and a size M Adaptaplug™ con- nector (neither supplied) available at your lo- cal RadioShack store.

Cautions:

You must use a Class 2 power

!source that supplies 6V DC and delivers at least 700 mA. Its

center tip must be set to negative and its plug must fit the cassette recorder’s DC 6V jack. Using an adapter that does not meet these specifications could damage the cassette recorder or the adapter.

Always connect the AC or DC adapter to the cassette recorder before you connect it to a power source. When you finish, dis- connect the adapter from its power source before you disconnect it from the cassette recorder.

1.Set the adapter’s voltage switch to 6V, if necessary, then connect the Adaptaplug to the adapter’s cord so the tip reads TIP–.

2.Insert the barrel plug into the recorder’s DC 6V jack.

3.Depending on which power source you are using, plug the other end of the adapter into a standard AC outlet or a vehicle’s 12V power source, such as a cigarette-lighter socket.

Notes:

Connecting an AC or DC adapter auto- matically disconnects internal batteries, if installed.

If the cassette recorder does not operate properly when you use DC power, be sure the 12V source (such as a cigarette- lighter socket) is clean and that the adapter’s plug is pushed all the way into the socket.

Disconnect the adapter when you are not using the cassette recorder.

Internal batteries (if installed) automati- cally disconnect when you plug the adapter into the DC 6V jack.

LISTENING SAFELY

To protect your hearing, follow these guide- lines when you use headphones.

Set the volume to the lowest setting before you begin listening. After you begin listening, adjust the volume to a comfortable level.

Do not listen at extremely high volume levels. Extended high-volume listening can lead to permanent hearing loss.

Once you set the volume, do not increase it. Over time, your ears adapt to the vol- ume level, so a volume level that does not cause discomfort might still damage your hearing.

TRAFFIC SAFETY

Do not wear headphones while operating a motor vehicle or riding a bicycle. This can cre- ate a traffic hazard and could be illegal in some areas.

Even though some headphones let you hear some outside sounds when listening at normal volume levels, they still can present a traffic hazard.

2

Image 3
Contents Contents SHOCK. do not Open Using Battery PowerFCC Wants YOU to Know Risk of ElectricInsert the barrel plug into the recorder’s DC 6V jack Using AC or DC PowerTraffic Safety Listening SafelyUsing the Radio Loading a Cassette TapeSlide Tape Radio OFF/RADIO to Radio Playing a Cassette Tape RecordingTape Tips Care Cleaning the Tape-Handling PartsSpecifications

SCR-65 specifications

The Radio Shack SCR-65, an iconic device from the renowned electronics retailer, stands out as a versatile and user-friendly shortwave receiver. Launched in the late 20th century, this compact radio was designed to cater to both amateur radio enthusiasts and casual listeners seeking to explore the fascinating world of shortwave broadcasting.

One of the primary features of the SCR-65 is its impressive frequency coverage. It typically spans from 1.6 to 30 MHz, allowing users to access a wide range of international broadcasts, amateur radio operators, and various utility stations. This broad range enables users to tune into a variety of signals, making it an ideal choice for those interested in diverse programming.

The SCR-65 boasts an analog dial with a clear tuning indicator, making it straightforward for users to find their favorite stations. The dial is complemented by a robust tuning knob, allowing for precise adjustments to hone in on specific frequencies. This combination of a well-designed dial and tuning mechanism enhances the overall listening experience, especially for those navigating the often crowded shortwave bands.

Audio quality is another standout characteristic of the SCR-65, which features built-in speakers and a headphone jack for private listening. Users can adjust the volume easily, ensuring that sound clarity is maintained across various stations. The radio also includes a means for manual frequency entry, allowing for quick access to known stations, a feature appreciated by more experienced users.

Additionally, the SCR-65 is equipped with a durable build, reflective of Radio Shack's commitment to quality and reliability in their products. Its portable design enables users to take it on the go, whether for outdoor adventures or simply moving around the house.

The integration of a ferrite bar antenna enhances reception, helping users pick up even the faintest of signals. This feature is particularly useful for enthusiasts wanting to explore lesser-known frequencies or those living in areas with challenging reception conditions.

In conclusion, the Radio Shack SCR-65 encapsulates the essence of a classic shortwave radio with its extensive frequency range, user-friendly design, and solid audio performance. It remains an enduring choice for radio aficionados seeking to explore the wonders of shortwave broadcasting.