Samsung LS57BPPNS/EDC, LS57BPHNB/EDC manual Interval, ~10 Hour Second, Scroll Pixel Bar Eraser

2)Interval

[MENU] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [∧ / ∨]→ [ENTER] →[∧ / ∨] → [ENTER] Determines the time interval to run the Screen Scroll operation. (1~10 Hour)

The time is calculated on the basis of the power on time. By default, the time is set to 10 hours.

-1~10 Hour

3)Second

[MENU] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [∧ / ∨]→ [ENTER] → [∧ / ∨] → [ENTER] Determines the time period to run the Screen Scroll operation. (1~5 Second)

By default, the time is set to 5 seconds.

-Type-Scroll : 1~5 Second

-Type-Pixel, Bar, Eraser : 10~50 Second

4)Type

[MENU] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] You can change the Safety Screen Type.

-Scroll

-Pixel

-Bar

-Eraser

Resolution Select

[MENU] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [∧ / ∨]→ [ENTER]

When the picture is not displayed properly on the screen when setting the graphics card resolution of the computer to 1024 x 768 @ 60Hz, 1280 x 768 @ 60Hz, 1920 x 1080 @ 60Hz or 1366 x768 @ 60Hz, by using this function(Resolution Select), you can have the picture displayed on the screen in the specified resolution.

Available in PC/BNC mode only

1)Off

2)1024 X 768

3)1280 X 768

4)1920 x 1080

5)1366 X 768

Note

•Selecting the menu is only allowed when the graphics resolution is set to 1024 x 768 @ 60Hz, 1280 x 768 @ 60Hz, 1920 x 1080 @ 60Hz or 1366 x768 @ 60Hz.

Lamp Control

[MENU] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [ENTER] → [< / >] → [ENTER]

Adjusts the inverter lamp in order to reduce energy consumption.

Note

•This function does not operate when Dynamic Contrast is set to On in AV, S-Video, Component, and DVI- Video modes.

Power On Adjustment

[MENU] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [ENTER] → [∧ / ∨]→ [ENTER]

Adjusts the Power On time for the screen.

*Caution: Set the Power On time to be loger to avoid overvoltage.

DVI Source