Samsung LT27B750EWV/EN manual Configuring the Basic Settings in Initial Setup, Menu Language

Getting Started

Configuring the Basic Settings in Initial Setup

When you turn the product on for the first time, a sequence of screens and on-screen prompts will assist you in configuring the product’s basic settings. Plug the power cord into a wall outlet, and then press the P button to turn on the product.

✎✎Setup is available only when the Source is set to TV. See "Changing the Input Source" (page 30). ✎✎To return to the previous step in the Setup sequence, select Previous.

✎✎If you are not using a cable box or satellite box, make sure you have connected the product to an aerial or cable connection before you turn on the product. See page 20 for instructions.

✎✎If you want to configure a wired network connection during Setup, make sure you've connected a LAN cable to your product. See page 67 for instructions. If you want to configure a wireless network connection during Setup, make sure your wireless modem or router is on and working. See page 66 for instructions.

1	Menu Language:
	Select a Language.

2	Use Mode: Select the
	Home Use Mode.

3	Network Settings:
	Configure the network
	settings
	To configure
	✎✎
	later, select Skip.
	You can set up
	the network
	connection later
	using the on-
	screen Network
	menu.

After you press the P button, the Start screen appears. Select Next to continue. The Menu Language screen appears. Select the menu language you want using your remote, and then select Start. The product will display on-screen menus using the language you select beginning with the next step in the Setup process.

On the Use Mode screen, select the Home Use mode using your remote, and then select Next. The Network Settings screen appears.

✎✎Store Demo mode is for retail environments only. If you select Store Demo, some functions will not work, and the product will reset all functions to their factory default after a certain period of time. For more information about Store Demo, go to the end of this section.

To configuring your network settings, select Next using your remote, and then go to 3A - Wireless Network or 3B - Wired Network on the next page.

If you do not know your network configuration information or want to configure the settings later, or do not have a network, select Skip, and then go to 6 - Auto Tuning (1) on page 50.

To configure network settings later, refer to the Network Connection sections in this manual (pages 69 and 72).

English - 21