Using the Software
2.The web camera, microphone and speaker will be set up automatically and appear on the status bar.
Note
•If the camera is recognized as a USB1.1 device, the screen quality may be degraded and noise may occur. Make sure to upgrade to USB 2.0.
•Because of the characteristics of USB communication, the device is recognized whenever it is turned off and on. When the recognition process is finished, you can use it normally.
•If you remove the cable while your PC is recognizing a USB device, it may cause a serious error to your PC.
•Do not turn the camera too forcefully. This may cause a product malfunction
•Make sure to remove the USB cable after clicking on the <Remove hardware safely> icon on the taskbar of your PC and unloading the USB device from Windows.
Installation Precautions
1.Never disconnect the USB cable from the USB port while the auto installation is in progress. (The installation takes about a minute. If you remove the USB port during the installation, a severe problem may occur with your PC.)
2.Do not turn off the monitor while the auto installation is in progress. (If you turn off the monitor during the installation, a severe problem may occur with your PC.)
3.The screen may blink when the auto installation is completed. (This occurs when your PC rec- ognizes your monitor as a USB device. This is not a fault.)
4.If the auto installation is completed, configure the position and resolution for the monitors in the [Settings] tab of the [Display Properties] window. (The optimal resolution for this monitor is 1680 x 1050.)
5.If you change the USB Port after your PC has recognized a USB device, it may cause a USB device recognition error. (You must remove and reinstall the driver.)
23