Samsung LS20BRDBBV/XSE, LS20BRDESQ/EDC, LS20BRDTS/EDC, LS20BRDBSQ/EDC, LS20BRDBSQ/XSA manual Class B

Page 73

1.Adjust computer resolution and screen injection rate (refresh rate) oncomputer as described below to enjoy the best quality of picture. You can have an uneven quality of picture in the screen if the best quality of picture is not provided in TFT-LCD.

{Resolution: 1600 X 1200

{Vertical frequency (refresh rate): 60 Hz

2.TFT LCD panel manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth) above is used for this product. But the pixels of RED, GREEN, BLUE and WHITE color seem to be bright sometimes or some of black pixels could be seen.

This is not from bad quality and you can use it without uneasiness.

{For example, the number of TFT LCD sub pixels that is contained in this product are 5,760,000.

3.When you clean the monitor and the panel outside, please apply the recommended small amount of cleaner by using soft and dry cloth and polish it. Let LCD area not to be forced but to be scrubbed out softly.

If excessive force is applied, you can have a stain on it.

4.If you are not satisfied with the quality of picture, you can get better quality of picture by executing "auto adjustment function" in display screen that is appeared as window termination button is pressed.

If there's still noise after automatic adjustment, use FINE/COARSE adjustment function.

5.If you view a fixed screen for an extended period of time, residual image or blurriness may appear.

Change the mode to energy save or set a screensaver to moving picture when you need to be away from the monitor for an extended period of time.

Authority

Information in this document is subject to change without notice. © 2005 Samsung Electronics Co., Ltd. All rights reserved.

Reproduction in any manner whatsoever without the written permission of Samsung Electronics Co., Ltd. is strictly forbidden.

Samsung Electronics Co., Ltd. shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.

Samsung is the registered trademark of Samsung Electronics Co., Ltd.; Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation; VESA, DPMS and DDC are registered trademarks of Video Electronics Standard Association; the ENERGY STAR® name and logo are registered trademarks of the U.S. Environmental Protection Agency (EPA). As an ENERGY STAR® Partner, Samsung Electronics Co., Ltd. has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. All other product names mentioned herein may be the trademarks or registered trademarks of their respective owners.

Class B

This device is a Class B digital apparatus. For Safety and EMC compliance guide, you may refer to "Regulatory" Guide.

Image 73
Contents SyncMaster 204B Notational Do not use a damaged or loose plug Insert the power plug firmly so that it does not come looseUse only a properly grounded plug and receptacle Keep any heating devices away from the power cable Do not drop the monitor when moving itDo not place the product on the floor Set down the monitor carefullyDo not spray water or detergent directly on the monitor Do not place the monitor face downDo not remove cover or back Never insert anything metallic into the monitor openings Do not cover the vents on the monitor cabinetFalling product could cause physical damage even death Monitor Manual Quick Setup Guide Natural Color, MagicTuneUsers Guide, Monitor Driver MagicRotation softwareCustom Sub Cable Power Cord Sold separately DVI Cable Set-BracketText Sport GameMovie Power ON/OFF Switch For using a locking device, contact where you purchase it Connecting the Monitor Pivot Stand / Sliding Stand Removing the baseAttaching a Base Stand StopperClick Windows ME Driver Windows MEWindows XP/2000 Click Windows XP/2000 DriverMicrosoft Windows XP Operating System Page How to install Microsoft Windows NT Operating System Click Start , Setting , Control PanelLinux Operating System Natural Color Software Program How to install the Natural Color softwareAuto Auto OSD Lock & Unlock Menu buttonMagicBright Source DescriptionPlay/Stop Brightness ContrastCoarse Fine Sharpness Position GammaLanguage Position Transparency Display Time Auto Source Image Reset Color Reset Page Overview Installation Page Installationation Problems Hardware Tray menu To execute Auto Rotation, it should be done as belowApplies any changes made and exits MagicTune Brightness ResolutionContrast MagicBrightControl Color ToneGamma MagicColorPosition Image SetupSharpness Source Select PreferencesAsset ID Page Color Calibration How multiple users can use adjusted color valuesPage Uninstall Troubleshooting Symptom Check List Graphic card, visit our website to check Overview Installation Page Installationation Problems System Requirements Interface Page Page Uninstall Troubleshooting Check List When connecting DVI cableDisplay → Settings Question Useful Tips Page General EPA/ENERGY Pixel Clock Sync Polarity Display Mode Frequency MHz KHz Preset Timing ModesChile Sonda S.A Germany United Kingdom PanamaDot Pitch ResolutionVertical Frequency Horizontal FrequencyClass B Power Off, Screen Saver, or Power Save Mode What is Image retention ?Suggestions for specific applications
Related manuals
Manual 80 pages 5.38 Kb Manual 78 pages 43.17 Kb Manual 79 pages 6.77 Kb Manual 80 pages 395 b Manual 77 pages 35.33 Kb Manual 85 pages 9.97 Kb Manual 75 pages 15.58 Kb Manual 78 pages 45.99 Kb Manual 75 pages 51.69 Kb Manual 77 pages 27.66 Kb Manual 79 pages 40.08 Kb Manual 78 pages 4.37 Kb Manual 78 pages 63.89 Kb Manual 77 pages 43.76 Kb Manual 77 pages 3.75 Kb Manual 71 pages 55.6 Kb Manual 79 pages 14.67 Kb Manual 83 pages 55.85 Kb