Samsung LS22MYLKF/CLT, LS20MYYKBB/EDC, LS22MYYKBB/EDC Rear, Using the Anti-Theft Kensington Lock

Introduction

Power button []

Use this button for turning the product on and off.

Power Indicator

This light is lit when operating normally, and blinks once when your

adjustments are saved.

Note

See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your monitor OFF when it is not needed or when leaving it unattended for long periods.

Rear

Note

The configuration at the back of the product may vary from product to product.

Simple Stand HAS Stand

POWER port

Connect the power cord for your monitor to the POWER port on the back of the product.

RGB IN port

Connect the D-sub cable to the 15-pin, RGB IN port on the back of your mon- itor.

Kensington Lock

The Kensington lock is a device used to physically fix the system when using it in a public place. (The locking device has to be purchased separately.) For using a locking device, contact where you purchase it.

Note

The location of the Kensington Lock may be different depending on its model.

Using the Anti-Theft Kensington Lock

1.Insert the locking device into the Kensington slot on the Monitor and turn it in the locking direction .