Samsung LT19GSBSS/EDC, LT19GSBSSZ/EDC manual Refer to the Preset Timing Modes

Page 26

The screen shows strange colors or just black and white.

There is no image on the screen.

Is the power indicator on the monitor blinking at 1 second intervals?

Connected using the DVI cable?

Is the screen displaying only one color as if looking at the screen through a cellophane paper?

Have the screen colors become strange after running a program or due to a crash between applications?

Has the video card been set properly?

mode during this one-minute period. (The message is displayed again if the system is rebooted.)

The monitor is in PowerSaver mode.

press a key on the keyboard to activate the monitor and restore the image on the screen.

You may get a blank screen if you boot the system before you connect the DVI cable, or disconnect and then reconnect the DVI cable while the system is running as certain types of graphic cards do not send out video signals.

Connect the DVI cable and then reboot the system.

Check the signal cable connection.Make sure the video card is fully inserted in it's slot.

Reboot the computer.

Set the video card by referring to the video card manual.

The screen suddenly has

Have you changed the video card or

become unbalanced.

the driver?

 

Have you adjusted the resolution or

 

frequency to the monitor?

Adjust screen image position and size using the OSD.

Adjust the resolution and frequency at the video card.

(Refer to the Preset Timing Modes).

The screen can be unbalanced due to the cycle of the video card signals. Readjust Position by referring to the OSD.

The screen is out of focus or OSD cannot be adjusted.

LED is blinking but no images on the screen.

Have you adjusted the resolution or frequency on the monitor?

Is the frequency properly adjusted when checking the Display Timing on the menu?

Adjust the resolution and frequency of the video card.

(Refer to the Preset Timing Modes).

Adjust the frequency properly by referring to the video card manual and the Preset Timing Modes.

(The maximum frequency per resolution may differ from product to product.)

There are only 16 colors shown on the screen. The screen colors have changed after changing the video card.

There is a message that reads "Unrecognized monitor, Plug & Play (VESA DDC) monitor found".

Have the Windows colors been set properly?

Has the video card been set properly?

Have you installed the monitor driver?

See the video card manual to see if the Plug & Play (VESA DDC) function can be supported.

Windows ME/2000/XP:

Set the colors properly at the Control Panel → Display → Settings.

Set the video card by referring to the video card manual.

Install the monitor driver according to the Driver Installation Instructions.

Install the monitor driver according to the Driver Installation Instructions.

Check the following items if there is trouble with the monitor.

1.Check if the power cord and the video cables are properly connected to the computer.

2.Check if the computer beeps more than 3 times when booting.

(If it does, request an after-service for the main board of the computer.)

3.If you installed a new video card or if you assembled the PC, check if the installed the adapter(video) driver and the monitor driver.

4.Check if the scanning ratio of the video screen is set at 56Hz ~ 75Hz. (Do not exceed 75Hz when using the maximum resolution.)

5.If you have problems in installing the adapter (video) driver, boot the computer in Safe Mode, remove the Display Adapter at the "Control Panel→System→Device Administrator" and then reboot the computer

Image 26
Contents Samtron 94B Power NotationalDo not drop the monitor when moving it InstallationInsert the power plug firmly so that it does not come loose Do not use a damaged or loose plugSet down the monitor carefully Keep any heating devices away from the power cableDo not place the product on the floor Do not place the monitor face downClean Do not spray water or detergent directly on the monitorOthers Do not remove cover or backDo not cover the vents on the monitor cabinet Never insert anything metallic into the monitor openingsFalling product could cause physical damage even death Unpacking Monitor Manual Quick Setup GuideCable Sub Cable Power Cord Not available in all locationsBrightness button Enter button / Source button Meun button MagicBright button Adjust buttonsFront CustomDVI in port For using a locking device, contact where you purchase itRear RGB in portAttaching a Base RGBDVI Windows XP/2000 Click Windows XP/2000 DriverWindows XP Windows 2000 Windows NT Linux Microsoft Windows XP Operating SystemPage How to install Click Start , Setting , Control Panel Microsoft Windows NT Operating System Linux Operating SystemAuto Menu MagicBrightBrightness DescriptionSelects the Video signal while the OSD is off SourceBrightness Contrast PictureColor Description Play/StopColor Control Gamma ImageOSD Coarse Fine Sharpness PositionSetup Language Position Transparency Display TimeInformation Auto Source Image Reset Color ResetShows a video source, display mode on the OSD screen Solutions SymptomCan you see Check Signal Cable on the screen? Mode,Recommended Mode 1280 x 1024 60Hz on the screen?Refer to the Preset Timing Modes Answer Self-Test Feature CheckQuestion Useful Tips General PowerSaver Preset Timing ModesHorizontal Frequency Preset Timing ModesSync Polarity Vertical FrequencyContact Samsung WORLD-WIDE Latin AmericaCIS Terms For Better DisplayAuthority Class BSuggestions for specific applications What is Image retention ?Power Off, Screen Saver, or Power Save Mode
Related manuals
Manual 40 pages 39.56 Kb Manual 41 pages 42.4 Kb Manual 38 pages 45.27 Kb Manual 39 pages 29.89 Kb Manual 39 pages 54.43 Kb Manual 39 pages 19.23 Kb

LT19GSBSSZ/EDC, LT19GSBSS/EDC specifications

The Samsung LT19GSBSS/EDC and LT19GSBSSZ/EDC are standout models in the realm of compact televisions, designed with innovative features and stylish aesthetics. These televisions are particularly suited for smaller living spaces, such as bedrooms, kitchens, or even decorative spaces where a sleek and efficient display is desired.

One of the defining features of these models is their 19-inch screen, which strikes a perfect balance between size and functionality. The screens are equipped with LED technology, enhancing picture clarity and color vibrancy, allowing users to enjoy their favorite shows and movies with stunning visuals. The HD resolution ensures that every detail is rendered sharply, making it a great choice for everything from streaming services to gaming.

Connectivity is another area where the LT19GSBSS/EDC and LT19GSBSSZ/EDC excel. Both models offer multiple HDMI ports, enabling seamless connections to various external devices such as gaming consoles, Blu-ray players, and streaming devices. Additionally, USB ports are included, allowing users to view photos and videos directly from their flash drives, adding to the versatility of these televisions.

The sound quality of these television models is noteworthy, featuring Dolby Digital technology that enhances the audio experience. This means that viewers can expect clear dialogue and rich soundscapes, perfect for enhancing the overall viewing experience whether they are watching movies or enjoying live sports.

Samsung also places importance on energy efficiency, and the LT19GSBSS/EDC and LT19GSBSSZ/EDC are no exception. With energy-saving features integrated into the design, these models not only reduce electricity consumption but also contribute to a more sustainable environment without compromising performance.

One of the most appealing characteristics of the LT19GSBSS/EDC and LT19GSBSSZ/EDC is their modern and elegant design. With a slim profile and minimalist bezels, they can fit seamlessly into any decor, ensuring they don’t dominate your space.

In conclusion, the Samsung LT19GSBSS/EDC and LT19GSBSSZ/EDC offer an impressive blend of compact size, advanced picture and sound technologies, and stylish design, making them ideal choices for anyone looking to maximize entertainment options in smaller spaces without sacrificing quality.