Samsung LT22C350MWQ/SM, LT23C350EW/EN manual Aerial, Auto Tuning, Country Area, Memorizing Channels

Basic Features

Memorizing Channels

Aerial

Menu → Broadcasting → Aerial

Before your product can memorize the available channels, you must select your Product signal source, Air (using an aerial) or Cable. Select Air or Cable. After you have selected the signal source, go on to the Auto Tuning function.

✎✎Selecting the signal source using the Aerial function also determines the signal source the product is tuned to. For example, if you receive your product signal over the air, and you select Cable, you will see only snow. You must select Air to see a picture.

Auto Tuning

Menu → Broadcasting → Auto Tuning

Automatically scans and indexes all channels received through the TV's aerial input connector. To start, navigate to Broadcasting and select Auto Tuning.

Select Start when prompted with a message. This initiates the Auto Tuning function. The process can take up to 30 minutes to complete. If Starting the Auto Tuning function when there is an existing index of channels overwrites the previous index.

•• Auto Tuning

Scans for channels automatically and stores them in the TV’s memory.

•• Cable Search Option (when the aerial was set to Cable) (Depending on the country)

Sets additional search options such as the frequency and symbol rate for a cable network search.

Country (Area)

Menu → Broadcasting → Channel Settings → Country (Area)

Select your country so that the product can correctly auto-tune the broadcasting channels. ✎✎The PIN input screen appears. Enter your 4 digit PIN number.

•• Digital Channel: Change the country for digital channels.

•• Analogue Channel: Change the country for analogue channels.

English - 39