Samsung LS17MJLKS/EDC manual Control Panel → Display → Settings

	There is no image on the
	screen.
	Is the power indicator on the
	monitor blinking at 1 second
	intervals?
The screen shows	Is the screen displaying only
strange colors or	one color as if looking at the
just black and	screen through a cellophane
white.	paper?
	Have the screen colors
	become strange after running
	a program or due to a crash
	between applications?

Please change to the recommended mode during this one-minute period.

(The message is displayed again if the system is rebooted.)

The monitor is in PowerSaver mode.

press a key on the keyboard to activate the monitor and restore the image on the screen.

Check the signal cable connection.Make sure the video card is fully inserted in it's slot.

Reboot the computer.

The screen suddenly has become unbalanced.

Has the video card been set properly?

Have you changed the video card or the driver?

Have you adjusted the resolution or frequency to the monitor?

Set the video card by referring to the video card manual.

Adjust screen image position and size using the OSD.

Adjust the resolution and frequency at the video card.

(Refer to the Preset Timing Modes).

The screen can be unbalanced due to the cycle of the video card signals. Readjust Position by referring to the OSD.

The screen is out	Have you adjusted the
of focus or OSD	resolution or frequency on the
cannot be	monitor?
adjusted.
LED is blinking but	Is the frequency properly
no images on the	adjusted when checking the
screen.	Display Timing on the menu?

Adjust the resolution and frequency of the video card.

(Refer to the Preset Timing Modes).

Adjust the frequency properly by referring to the video card manual and the Preset Timing Modes.

(The maximum frequency per resolution may differ from product to product.)

There are only 16	Have the Windows colors been
colors shown on	set properly?
the screen.
The screen colors
have changed after	Has the video card been set
changing the video
card.	properly?
There is a	Have you installed the monitor
message that	driver?
reads	See the video card manual to
"Unrecognized
monitor, Plug &	see if the Plug & Play (VESA
Play (VESA DDC)	DDC) function can be
monitor found".	supported.
Check when	MagicTune™ feature is found
MagicTune™ does	only on PC (VGA) with
not function	Window OS that supports Plug
properly.	and Play.

Windows ME/2000/XP:

Set the colors properly at the

Control Panel → Display → Settings.

Set the video card by referring to the video card manual.

Install the monitor driver according to the Driver Installation Instructions.

Install the monitor driver according to the Driver Installation Instructions.

*To check whether your PC is available for MagicTune™ feature, follow the

steps below (When Windows is XP);

Control Panel -> Performance and Maintenance -> System -> Hardware -> Device Manager -> Monitors -> After deleting Plug and