Samsung LS19RTUSSZ/EDC manual Problems Solutions

Page 41

6. Symptoms and Recommended Actions

A monitor recreates visual signals received from the computer. Therefore, if there is trouble with the computer or the video card, this can cause the monitor to become blank, have poor coloring, noise, Video mode not supported, etc. In this case, first check the source of the problem, and then contact a service center or your dealer.

1.Check if the power cord and the video cables are properly connected to the computer.

2.Check if the computer beeps more than 3 times when booting.

(If it does, request an after-service for the main board of the computer.)

3.If you installed a new video card or if you assembled the PC, check if you installed the adapter(video) driver and the monitor driver.

4.Check if the scanning ratio of the video screen is set at 56Hz or 85Hz. (Do not exceed 60Hz when using the maximum resolution.)

5.If you have problems in installing the adapter (video) driver, boot the computer in Safe Mode, remove the Display Adapter at the "Control Panel, System, Device Administrator" and then reboot the computer to reinstall the adapter (video) driver.

The following table lists possible problems and their solutions. Before calling for service, check the information in this section to see if you can remedy any problems yourself. If you do need assistance, please call the phone number on the Information section or contact your dealer.

Installation Screen Audio Remote Control

1. Problems related to Installation

Problems related to the monitor installation and their solutions are listed.

 

Problems

 

Solutions

 

 

 

 

 

 

 

 

 

 

 

 

It appears the PC does not

 

z Check if the Display Adapter Driver (VGA Driver) is properly

 

 

function normally.

 

installed.

 

 

 

 

(Refer to Installing Driver)

 

 

 

 

 

 

 

 

 

 

 

 

The monitor screen flickers.

 

z Check if the signal cable between the computer and the

 

 

 

 

monitor is securely connected and tightened.

 

 

 

 

(Refer to Connecting to a Computer)

 

 

 

 

 

 

 

 

 

 

 

 

TV screen is blurred or shows

 

z Check if the TV antenna connector is securely connected to

 

 

noise signals.

 

the external antenna.

 

 

 

 

(Refer to Connecting to TV)

 

 

 

 

 

 

 

 

 

 

 

 

TV signal is not received

 

z Check "Channel system" and make sure you choose the

 

 

 

 

correct channel system.

 

 

 

 

(Refer to the Channel System)

 

 

 

 

z Select "Auto program" to configure the channel system

 

 

 

 

automatically. (Refer to the Auto Program)

 

 

 

 

 

 

 

 

 

 

 

2. Problems related to Screen

Problems related to the monitor screen and their solutions are listed.

Problems

 

Solutions

 

 

 

 

 

 

Screen is blank and power

 

z Ensure that the power cord is firmly connected and the LCD

indicator is off

 

monitor is on.

 

 

(Refer to the Connecting the Monitor)

 

 

 

 

 

 

"Check Signal Cable" message

 

z Ensure that the signal cable is firmly connected to the PC or

 

 

video sources.

 

 

(Refer to the Connecting the Monitor)

 

 

z Ensure that the PC or video sources are turned on.

 

 

 

 

 

 

"Not Supported Mode" message

 

z Check the maximum resolution and the frequency of the

 

 

video adapter.

 

 

 

Page 40 Page 42
Image 41
Page 40 Page 42
Contents SyncMaster 932MP Do not use a damaged or loose plug Use only a properly grounded plug and receptacle Insert the power plug firmly so that it does not come looseDo not drop the monitor when moving it Do not place the product on the floor Keep any heating devices away from the power cableSet down the monitor carefully Do not place the monitor face downDo not spray water or detergent directly on the monitor Do not remove cover or back Never insert anything metallic into the monitor openings Do not cover the vents on the monitor cabinetRemove and discard vinyl bag from power adapter before use Keep all power adapters apartKeep power adapter away from any other heat source To vibrations When moving the monitor, turn off and unplug the power cordCable Monitor Manual Quick Setup GuideMenu Auto ENTER/FM Radio Source Sub Cable Power CordAudio Cable MagicBright Available in PC/DVI Mode Only PIP Available in PC/DVI Mode OnlyMenu Enter / FM RadioDVI/PC FM ANT / ANT ComponentExtrgb Scart is mainly used in EuropeMute TTX/MIX Menu Enter FM Radio PowerStill DUAL/MTSMute This function is available only in Korea 20. S.MODE Sound ModeDual / MTS Connecting to a Computer Connecting the monitorConnecting AV Devices Connecting to a MacintoshConnecting TV When using an outdoor antenna When using an interior antenna terminalIs weak signal causing poor reception? To connect the RF cable to the antenna input terminalFolding the base Connecting HeadphoneRemoving the base Install a Vesa baseClick Windows ME Driver Windows MEWindows XP/2000 Click Windows XP/2000 DriverMicrosoft Windows XP Operating System Installing the Monitor DriverManualPage How to install Microsoft Windows NT Operating System Click Start , Setting , Control PanelLinux Operating System Natural Color Software ProgramHow to install the Natural Color software OSD Remote Control Direct button Source buttonDescription Play/Stop Video ComponentDVI Adjust the Contrast Remote Control Direct button M/B button EntertainAdjust the Brightness Available in PC Mode Only Cool / Normal / Warm / CustomTV / Ext. / AV / S-Video / Component Mode Available in PC Mode Only CoarseDescription Play/Stop Mode FineSound BBE Add / Delete Manual StoreAir STDIRC HRCAFN LNAEnglish, Spanish, French, Portuguese Available in PC Mode Only Image Reset Color ResetChannel 1 Transparency High Medium Low OpaqueNot Supported Mode Self-Test Feature CheckDisplay Adapter Driver Not Optimum ModeMaintenance and Cleaning Problems Solutions Items to check ProblemsAnswer QuestionInput Signal, Terminated ResolutionPower Supply Signal CablePower Saving Power ConsumptionDimensions WxDxH/ Weight State Normal Operation Power saving mode Power offBroadcasting Systems Sync PolarityBroadcasting Systems CountriesEcuadorVertical Frequency Broadcasting Systems CountriesHorizontal Frequency Canada Australia BrazilChile Sonda S.A ColombiaGermany FranceHungary ItalyPortugal PeruSouth Africa SWEDEN/DENMARK/NORWAY/FINLANDCatv DVD VHF/UHFBtsc EiajClass B Product Information Image Retention Free
Related manuals
Manual 58 pages 952 b Manual 58 pages 52.86 Kb Manual 56 pages 11.26 Kb Manual 56 pages 15.76 Kb Manual 56 pages 60.12 Kb Manual 60 pages 11.21 Kb Manual 58 pages 13.73 Kb Manual 60 pages 42.2 Kb Manual 60 pages 32.37 Kb Manual 59 pages 11.58 Kb Manual 56 pages 10.29 Kb Manual 58 pages 52.2 Kb Manual 57 pages 63.12 Kb Manual 59 pages 19.55 Kb Manual 55 pages 57.33 Kb

LS19RTUSSZ/EDC specifications

The Samsung LS19RTUSSZ/EDC is an impressive monitor designed to meet the needs of both casual users and professionals alike. Offering a combination of style, performance, and advanced technology, this model is an appealing choice for those in search of an efficient and visually pleasing display.

One of the standout features of the LS19RTUSSZ/EDC is its stunning 19-inch screen, which boasts a resolution of 1280 x 1024 pixels. This ensures crisp and clear visuals, providing a delightful viewing experience for various applications, from everyday computing tasks to multimedia consumption. With an aspect ratio of 5:4, the monitor is perfect for both office work and gaming, offering ample screen space while maintaining a compact profile.

The monitor employs advanced LED backlighting technology, which not only enhances brightness but also contributes to energy efficiency. This allows users to enjoy vibrant, true-to-life colors while also reducing power consumption, making it an eco-friendly choice. The LS19RTUSSZ/EDC features a typical brightness of up to 250 cd/m², ensuring that images remain clear even in brightly lit environments.

Another notable characteristic of this monitor is its impressive response time of just 5 milliseconds. This rapid response time reduces motion blur, making it ideal for fast-paced applications and gaming experiences. Coupled with a wide viewing angle of 178 degrees both horizontally and vertically, users can enjoy consistent and accurate colors from various positions.

In addition to its remarkable display characteristics, the LS19RTUSSZ/EDC is designed with convenience and ergonomics in mind. The monitor features an adjustable stand that allows users to customize the height and tilt, ensuring comfortable viewing angles and reducing neck strain during extended use. Furthermore, it includes multiple connectivity options, including VGA and DVI ports, enabling compatibility with a wide range of devices.

Overall, the Samsung LS19RTUSSZ/EDC is an excellent choice for anyone seeking a high-quality monitor with exceptional visual performance, energy efficiency, and ergonomic design. Its combination of innovative features and user-friendly characteristics make it a versatile option that fits seamlessly into any workspace or home environment. Whether for work or play, this monitor is built to impress and enhance your computing experience.
Top Page Image Contents