Samsung LS22AQVJFV/EDC manual Connections, Connecting Cables, Using the Stand Monitor Assembly

Page 6

Connections

Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet.

Use a connection appropriate for your computer.

Using the D-sub (Analog) connector on the video card.

•Connect the signal cable to the 15-pin, D-sub port on the back of your monitor.

Using the DVI (Digital) connector on the video card.

•Connect the DVI Cable to the DVI IN Port on the back of your Monitor.

Connected to a Macintosh.

•Connect the monitor to the Macintosh computer using the D-sub connection cable.

Note

If the monitor and the computer are connected, you can turn them on and use them.

Image 6

Contents

LCD Monitor Package Contents IntroductionUnpacking Your Monitor Initial Settings FrontMenu button Menu Rear Power buttonPower port Enter button / Source buttonDVI in port RGB in portKensington Lock Connecting Cables Using the Stand Monitor AssemblyConnections Attaching a Base Environment TroubleshootingSelf-Test Feature Check Useful TipsCheck List No images on the screen. I cannot turn on the monitorCannot see the On Screen Display Screen shows strange colors or just black and whiteScreen suddenly has become unbalanced Screen is out of focus or OSD cannot be adjusted Check when MagicTune does not function properlyLED is blinking but no images on the screen MagicTune doesnt work properly

Related manuals

Manual 13 pages 81 b