Samsung ML15XSASS/EDC Plug and Play, Installing the Video Driver, Self-Test Feature Check Stfc

Page 8

Setting up Your LCD Monitor

Plug and Play

The adoption of the new VESA® Plug and Play solution eliminates complicated and time con- suming setup. It allows you to install your monitor in a Plug and Play compatible system with- out the usual hassles and confusion. Your PC system can easily identify and configure itself for use with your display. This monitor automatically tells the PC system its Extended Display Identification Data (EDID) using Display Data Channel (DDC) protocols so the PC system can automatically configure itself to use the flat panel display. If your PC system needs a video driver, follow the instructions given below according to the operating system your computer uses.

Installing the Video Driver

The CD that accompanies this product contains the necessary drivers for installing your mon- itor. Please refer to the driver installation instructions included with your CD package for more information.

Self-Test Feature Check (STFC)

Your monitor provides a self-test feature that allows you to check whether your monitor is function- ing properly. Make sure that PC is selected as a primary source by checking if the source indicator LED labeled “PC” is on. If your monitor and computer are properly connected but the monitor screen remains dark and the power indicator is blinking, run the monitor self-test by following the steps given below:

Power Indicator

Figure 4. Power Indicator

1

2

3

Turn off both your computer and the monitor.

Unplug the video cable from the back of the computer.

Turn on the monitor.

English 6

Page 7 Page 9
Image 8
Page 7 Page 9
Contents SyncMaster150MB SyncMaster170MB Page Table of Contents Electric socket Monitor doing so may create the danger of electric shockTechnician should open the case of the LCD monitor Unpacking Your Monitor Kensington Security Slot Setting up Your LCD MonitorSetting up an Ergonomic Workstation See page12 Connecting Your LCD MonitorPower port on the back of your monitor Installing the Video Driver Self-Test Feature Check StfcPower Indicator Plug and PlayGetting Help Warm-up TimeAdjusting Your LCD Monitor User ControlsAutomatic Save Moves the selector up or down on the OSDMoves the selector left or right on the OSD VOL +Direct-Access Features While you are watching full screen TV or in PIP mode VolumeVolume Brightness Contrast VolumeON-Screen DisplayOSD Accessing the menu systemFunction icons Function name Setting bar Tool Tip OSD functions and adjustments Auto AdjustmentPosition are adjusted automatically Screen controlsInformation Display current display mode Reset Factory default valuesFine CoarsePicture ColorPIPPicture-in Video Control Than PC.DVD,VCRBrightness RGB’s brightnessImage Effect TimerImage Size OSD Control Appendix By Remote-ControlPowerSaver Power-saving modesIndicator Amber BlinkingTroubleshooting Power Saver, Panel, Display, SettingsChange the display settings Screen is blankTroubleshooting Audio Check the volume control on DocumentationNo sound Sound card or softwareSpecifications When folded TemperatureWith stand CartonPin D-sub connector Pin AssignmentsRed Green Green + H/V Sync Blue HSync Not usedPreset timing modes Display ModesInstalling Vesa compliant mounting devices Wall Mount InstructionsRefer to page 29 to fold the base MountingRetractable Stand Maintenance of Your LCD monitor Unplug the monitor from the power outlet before cleaningApplications Attaching a wall or Arm mounting deviceUp -right position Index Regulatory Information FCC InformationIC Compliance Notice MPR II ComplianceGermany
Related manuals
Manual 31 pages 47.8 Kb Manual 31 pages 47.7 Kb
Top Page Image Contents