1.Turn the Dust Barrel to the left and pull it.
2.Disconnect the Cyclonic Filter from extension wand and handle.
3.Remove thread and hair tangled around the net.
4.After cleaning the Dust Barrel and Cyclonic Filter,connect the Cyclonic Filter with extension wand and handle(washed part should be dried in the shade throughly before assembling).
5.Push and turn the Dust Barrel to the right.
Adjust indicating marks each other carved on Dust Barrel and Cyclonic Filter.
CYCLONIC
FILTER
DUST | CREVICE |
BARREL | TOOL |
- IF YOU HAVE A PROBLEM
PROBLEM | CAUSE | REMEDY | |
|
|
| |
Motor does not start. | No power supply. | Check cable, plug and | |
Thermal | socket.Leave to cool. | ||
| |||
|
|
| |
Suction force is gradually | Nozzle, suction hose or | Remove the object. | |
decreasing. | tube is blocked. | ||
| |||
|
|
| |
Cord does not rewind fully. | Check that the cord is not | Pull the cord out | |
twisted or wound unevenly. | down the cord rewind button. | ||
|
|
| |
Vacuum cleaner does not | Crack or hole in hose. | Check hose and replace if | |
pick up dirt. | required. | ||
| |||
|
|
|