Removing the Stand (C22F390FH* / C22F392FH* / C24F390FH* / C24F392FH* / C24F394FH* / C24F399FH* / C27F390FH* / C27F391FH* / C32F391FW*)
――Before removing the stand from the monitor, place the monitor on a flat and stable surface with the screen facing down.
: The product is curved. Placing pressure on the product when on a flat surface may damage the product. When the product is on the ground facing up or down, do not put pressure on it. ――The exterior may differ depending on the product.
1
2
Place the protective Styrofoam (cushion) included in the package on the floor and place the product facing down on the Styrofoam, as shown in the image.
If Styrofoam is unavailable, use a thick sitting mat.
While holding the monitor with one hand, pull the stand neck with your other hand to in detach the stand as shown in the figure.
Turn the connecting screw at the bottom of the stand base to separate it.
- Caution
Do not press down on the monitor. There is a risk of damaging the monitor.
Remove the stand neck from the stand base by pulling
3 | it in the direction of the arrow as shown in the figure. |
|
21