Question, Answer, Self-Test Feature Check

Samsung LS19MBPXHV/EDC, LS19MBPXFV/EDC, LS19MBXXFV/EDC Question, Answer, Self-Test Feature Check

Page 44

graphic card?	http://www.samsung.com/monitor/magictune
Did you install the	Reboot the computer after installing
program?	the program for the first time. If a
	copy of the program is already
	installed, remove it, reboot the
	computer, and then install the
	program again. You need to reboot
	the computer for it to operate
	normally after installing or removing
	the program.

Visit our website and download the installation software for MagicTune™ MAC.

Check the following items if there is trouble with the monitor.

1.Check if the power cord and the video cables are properly connected to the computer.

2.Check if the computer beeps more than 3 times when booting.

(If it does, request an after-service for the main board of the computer.)

3.If you installed a new video card or if you assembled the PC, check if the installed the adapter (video) driver and the monitor driver.

4.Check if the scanning ratio of the video screen is set at 56 Hz ~ 75 Hz. (Do not exceed 60 Hz when using the maximum resolution.)

5.If you have problems in installing the adapter (video) driver, boot the computer in Safe Mode, remove the Display Adapter at the "Control Panel→System→Device Administrator" and then reboot the computer to reinstall the adapter (video) driver.

If problems repeatedly occur, contact an authorized service center.

Q & A

Question

How can I change the frequency?

Answer

Frequency can be changed by reconfiguring the video card.

Note that video card support can vary, depending on the version of the driver used. (Refer to the computer or the video card manual for details.)

How can I adjust the resolution?

How can I set the Power Saving function?

How can I clean the outer case/LCD Panel?

Windows ME/XP/2000 : Set the resolution at the Control Panel→Display→Settings.

* Contact the video card manufacturer for details.

Windows ME/XP/2000 : Set the function at BIOS-SETUP of the computer or the screen saver. (Refer to Windows/Computer Manual).

Disconnect the power cord and then clean the monitor with a soft cloth, using either a cleaning solution or plain water.

Do not leave any remains of the detergent nor scratch the case. Do not allow any water to go inside the monitor.

Self-Test Feature Check

Self-Test Feature Check Warning Messages Environment Useful Tips

Your monitor provides a self test feature that allows you to check whether your monitor is

Image 44

Contents

SyncMaster 971P Notational Insert the power plug firmly so that it does not come loose Do not disconnect the power cord while using the monitorDo not use a damaged or loose plug Use only a properly grounded plug and receptacleDo not place the product on the floor Do not drop the monitor when moving itKeep any heating devices away from the power cable Bookshelf, closet, etc Put down the monitor carefullyDo not place the monitor face down Keep the plastic packaging bag out of children’s reachOthers Do not remove the cover or backDo not cover the vents on the monitor cabinet Never insert anything metallic into the monitor openingsPage Good Postures When Using the Monitor Monitor List of FeaturesUnpacking Front Customized Key Power indicator / Power button Auto SetupPower On/Off MagicColorRear Auto adjustmentInput Source UP USB upstream port Down USB downstream portConnecting the Monitor Rotating the monitor Rotating the monitorInstalling the Monitor Driver Manual Microsoft Windows Vista Operating SystemPage Page Microsoft Windows XP Operating System Page How to install Click Start , Setting , Control Panel Natural Color Software Program Microsoft Windows NT Operating SystemLinux Operating System How to install the Natural Color software Installation Problems MagicTune System RequirementsInstallation Problems MagicRotation Service PacksHardware LimitationWhat is MagicTune? OverviewBasic Functionality OSD ModeOSD Mode s Resolution BrightnessContrast MagicBrightColorTone ControlZone Off Reset ColorInnovation Image Tab DefinitionImage Setup Option Tab DefinitionPreferences SourceColor Calibration Preview How multiple users can use adjusted color valuesTroubleshooting To ensure normal operation, please restart your system Symptom Check List SolutionsWhat is MagicRotation? Basic FunctionInterface To execute AutoRotation, it should be done as belowPage Page Before You Call Technical Support Page Symptom No Connection Check Signal Cable on the screen?When connecting DVI-A to D-Sub Cable When connecting DVI cableDisplay → Settings Installation InstructionsAnswer Self-Test Feature CheckQuestion Functioning properly Self-Test Feature Check Useful TipsResolution Input Signal, TerminatedPower Supply Signal CablePowerSaver State Normal Operation Power saving mode Power offEnvironmental considerations Plug and Play CapabilityPreset Timing Modes Pixel Clock Sync Polarity Display Mode Frequency MHz KHzHorizontal Horizontal FrequencyContact Samsung Worldwide North AmericaLatin America EuropeCIS Asia PacificFor Better Display Middle East & AfricaTerms Authority MéxicoPage Warranty What is Image retention ?Power Off, Screen Saver, or Power Save Mode Suggestions for specific applications

Related manuals

Samsung LS19MBPXHV/EDC, LS19MBPXFV/EDC, LS19MBXXFV/EDC Question, Answer, Self-Test Feature Check

Question

Answer

Self-Test Feature Check