Samsung LH40MGTLGD/EN, LH46MGPLGD/EN Connecting to a Camcorder, Connecting Using a Hdmi Cable

Connections

1.Connect the port of the DVD, VCR (DVD / DTV Set-Top Box) to the [R-AUDIO-L] port of the LCD Display.

2.Then, start the DVD, VCR or Camcorders with a DVD disc or tape inserted.

3.Select AV using the SOURCE .

Note

The LCD Display has AV connection terminals to connect AV input devices like DVDs, VCRs or Camcorders. You may enjoy AV signals as long as the LCD Display is turned on.

Connecting to a Camcorder

1.Locate the AV output jacks on the camcorder. They are usually found on the side or back of the camcorder. Connect a set of audio cables between the AUDIO OUTPUT jacks on the camcorder and the AV AUDIO IN [L-AUDIO-R] on the LCD Display.

2.Connect a video cable between the VIDEO OUTPUT jack on the camcorder and the AV IN [VIDEO] on the LCD Display.

3.Select AV for the Camcorder connection using the Source button on the front of the LCD Display or on the remote control.

4.Then, start the Camcorders with a tape inserted.

Note

The audio-video cables shown here are usually included with a Camcorder. (If not, check your local electronics store.) If your camcorder is stereo, you need to connect a set of two cables.

Connecting Using a HDMI Cable

Note

•Input devices such as digital DVD are connected to the HDMI terminal of the LCD Display using the HDMI cable.