Samsung LC27FG73FQEXXV Hdmi Black Level, Eye Saver Mode, Screen Adjustment, Calibration Report

Page 38

HDMI Black Level

If a DVD player or set-top box is connected to the product via HDMI, image quality degradation (contrast/ color degradation, black level, etc.) may occur, depending on the connected source device. In such case, HDMI Black Level can be used to adjust the image quality.

If this is the case, correct the degraded picture quality using HDMI Black Level.

――This function is only available in HDMI1, HDMI2 mode.

•• Normal: Select this mode when there is no contrast ratio degradation.

•• Low: Select this mode to reduce the black level and increase the white level when there is a contrast ratio degradation.

――HDMI Black Level may not be compatible with some source devices.

――The HDMI Black Level feature is only activated at a certain AV resolution, such as 720P @ 60 Hz and 1080P @ 60 Hz.

Eye Saver Mode

Set to an optimum picture quality suitable for eye relaxation.

TÜV Rheinland “Low Blue Light Content” is a certification for products which meet requirements for lower blue light levels. When Eye Saver Mode is 'On', the blue light that wavelength is around 400nm will decrease, and it will provide an optimum picture quality suitable for eye relaxation. At the same time, the blue light level is lower than in the default settings, and it was tested by TÜV Rheinland and certified as it met the requirements of TÜV Rheinland “Low Blue Light Content” standards.

Screen Adjustment

――This option is only available when PC/AV Mode is set to AV.

――This menu is only available when Screen Size is set to Screen Fit in AV Mode.

When a 480P or 576P or 720P or1080P signal is input in AV mode and the monitor can display normally, select Screen Fit to adjust horizontal position in 0-6 levels.

Configuring H-Position & V-Position

H-Position: Move the screen to the left or right.

V-Position: Move the screen up or down.

Calibration Report

The data from this report are measured at the time of shipment.

•• The measurements may vary according to the measuring equipment, measuring location, system environment (e.g. computer, graphic board, etc) and other variables.

•• Input signal: HDMI

•• Each measurement from this report is based on the Custom mode at the time of shipment.

•• This report is not provided on the menu of some products, but in an separate hardcopy report instead.

38

Image 38
Contents Gaming Monitor Table of contents Adjusting OSD On Screen Display settings Safety Precautions Before Using the ProductSecuring the Installation Space Precautions for storageCleaning Electricity and SafetyInstallation Operation Page Page Control Panel PreparationsParts Function Key Guide Game Setting Key Changing the Volume setting Changing Brightness, Contrast and Sharpness settingsReverse Side Adjusting the Product Tilt and Height Rotating the Monitor Screen You can rotate your monitor as shown below FG70 FG7390˚ Precautions for moving the monitor Anti-theft LockInstallation Assembling the Stand base C*FG70* model onlyAssembling the Stand base C*FG73* model only Arrow Image Arrow Image Attaching the Bracket Wall Align B withAttaching the Stand C*FG70* model only Attaching the Stand C*FG73* model only Connection Using the Hdmi Cable Connecting and Using a Source DeviceConnecting and Using a PC Connection Using an HDMI-DVI CableConnecting the Power C24FG70FQ* / C24FG73FQ* model only Connection Using an DP CableConnecting to Headphones C24FG70FQConnecting the Power C27FG70FQ* / C27FG73FQ* model only Tidying Up the Connected Cables C*FG70* model onlyTidying Up the Connected Cables C*FG73* model only Correct posture to use the product Driver InstallationSetting Optimum Resolution Picture Mode GameBlack Equalizer Adjust the brightness of the dark areasRefresh Rate Response TimeFreeSync Set FreeSync to On in the OSD on the monitorLow Input Lag Screen SizeSave Settings Game Setting KeyScreen Setup Contrast Adjust the tint of the screenBrightness SharpnessHdmi Black Level Eye Saver ModeScreen Adjustment Calibration ReportDisplay Time Adjusting OSD On Screen Display settingsLanguage Set the menu languageSetup and Reset Arena Lighting C*FG70* model onlyPC/AV Mode VolumeOff Timer Eco Saving PlusSource Detection Power LED OnReset All Key Repeat TimeRestrictions and Problems with the Installation Installing the SoftwareEasy Setting Box System RequirementsChecking the Resolution and Frequency Troubleshooting GuideTesting the Product Check that the power cable is connected properlyChange the Color settings Check the cable connection to the productSet the frequency on your graphics card Specifications GeneralStandard Signal Mode Table 60.000 108.000 +/+ 346.500Appendix Responsibility for the Pay Service Cost to CustomersProduct damage caused by customers fault Not a product defect
Related manuals
Manual 50 pages 55.29 Kb Manual 50 pages 48.47 Kb Manual 50 pages 24.74 Kb Manual 50 pages 38.03 Kb Manual 50 pages 39.79 Kb Manual 50 pages 41.72 Kb Manual 50 pages 41.63 Kb Manual 50 pages 376 b Manual 50 pages 30.82 Kb Manual 50 pages 20.45 Kb Manual 50 pages 60.8 Kb Manual 50 pages 20.16 Kb Manual 50 pages 21.13 Kb Manual 50 pages 38.74 Kb Manual 50 pages 14.27 Kb Manual 50 pages 44.8 Kb

LC24FG73FQUXEN, LC27FG73FQIXCI, LC24FG73FQMXCH, LC27FG73FQIXRU, LC24FG73FQIXRU specifications

Samsung LC27FG73FQUXEN and LC24FG73FQUXEN are high-performance curved gaming monitors that exemplify Samsung's commitment to cutting-edge technology and user-centric design. Featuring a stunning curvature of 1800R, both models are designed to immerse gamers in the action, enhancing their overall experience by allowing them to focus more easily on what's happening on-screen.

One of the standout features of these monitors is their Quantum Dot technology, which delivers vibrant colors and exceptional brightness levels. With a wide color gamut, the monitors cover 125% of the sRGB spectrum, ensuring that graphics appear lifelike and rich. This makes them not just suitable for gaming but also for creative professionals who require accurate color representation for tasks such as photo and video editing.

The resolution of the LC27FG73FQUXEN is 2560 x 1440 pixels (WQHD), while the LC24FG73FQUXEN features a Full HD resolution of 1920 x 1080 pixels. The higher resolution in the 27-inch model allows for sharper images and more detailed visuals, creating a more engaging gaming experience. Both monitors boast a rapid refresh rate of 144Hz, ensuring smooth motion and reducing motion blur during fast-paced gameplay. The 1ms response time further enhances this smoothness, making these monitors an ideal choice for competitive gamers who demand the best performance.

Additionally, the LC27FG73FQUXEN and LC24FG73FQUXEN are equipped with AMD FreeSync technology, which synchronizes the monitor's refresh rate with the frame rate produced by the graphics card. This eliminates screen tearing and stuttering, providing a seamless and fluid gaming experience.

The design of these monitors is not just function-focused but also aesthetically pleasing, featuring ultra-slim bezels that promote an immersive viewing experience. The ability to adjust the height, tilt, and swivel of the monitor adds to user comfort, allowing gamers to set up their workspace to their preference.

In conclusion, Samsung LC27FG73FQUXEN and LC24FG73FQUXEN monitors stand out with their impressive technologies, including Quantum Dot color technology, high refresh rates, and AMD FreeSync support. With ergonomic design and superior image quality, they cater to gamers and professionals alike, making them worthy contenders in the competitive monitor market. Whether for gaming or productivity, these monitors offer a compelling mix of performance and visual appeal.