Setup menu 2 ( )
Quick view
If you enable Quick View before capturing an image, you can view the image you just captured on the LCD monitor for the duration set in the [Quick View] setup. Quick view is possible only with still images.
Auto power off
This function switches the camera off after a set amount of time in order to prevent unnecessary battery drainage.
- Sub menus
[Off] | : The quick view function can’t be |
| activated. |
[0.5, 1, 3 sec] : The captured image is briefly displayed during the selected time.
SETUP2 Quick View
Power Off LCD Save
Video Out
Format
Reset
◀Back
Off
0.5sec
1 sec
3 sec
OK Set
: The power off function will not
operate. [1, 3, 5, 10 min] : The power will turn off automatically if not used for the period of time specified.
- After replacing the battery, the power off setting will be preserved.
- Note that the automatic power off function will not operate if the camera is in the PC / Printer mode, slide show, playing back a voice recording and playing back a movie clip.
LCD save
If you set the [LCD save] to On and the camera isn't operated during the specified time, the LCD monitor will be turned off automatically.
-Sub menus
[Off] : The LCD monitor will not be turned off.
[On] : If the camera isn't operated during the specified time (about 30 SEC.), the camera power will be idle (Camera status lamp:Blinking) automatically.
SETUP2
Quick View
Power Off
LCD Save
Video Out
Format
Reset
◀Back
Off
On
OK Set
《59》