Metering
■ If you cannot obtain suitable exposure conditions, you can change the metering |
method to take brighter pictures. |
Auto Focus type
■You can select your preferred Auto Focus type according to the shooting condition.
[Multi] : Exposure will be calculated based on an average of the available light in the image area. However, the calculation will be biased towards the centre of the image area.
This is suitable for general use.
- [Multi AF] : This camera selects a AF point from the 5 AF points.
-[Center AF] : The rectangular area in the center of the LCD monitor will be focused
AUTO FOCUS |
Multi AF |
Center AF |
[Spot] : Only the rectangular area in the centre of the LCD monitor will be metered for light. This is suitable when the subject in the
centre is exposed correctly, regardless of the back lighting.
※If the subject is not the centre of the focus area, do not use the spot metering as this may result in an exposure error. In this circumstance, it is better to use exposure compensation.
[ PROGRAM mode ]
[Multi AF] | [Center AF] |
※When the camera focuses on the subject, the auto focus frame turns too green. When the camera doesn’t focus on the subject, the auto focus frame turns to red.
《37》