FAQ
About USB
How do I know my computer supports USB Interface
Check the USB port in your computer or keyboard.
Check [Universal serial bus controller] in Device Manager.
Do as follow for checking [Universal serial bus controller] Trace [start 
setting 
controller 
system
Device Manager 
Universal serial bus controller]. In addition, there must be USB Host Controller and USB root hub under [Universal serial bus controller].
Check OS version. USB Interface is available in Windows 98, 98SE, 2000, ME or later.
In case that all the conditions that mentioned above are set, the computer can support USB interface.
About hardware
Booting is impossible when a new CF CARD is inserted.
The camera power is turned off continuously with BOOT message and E05 error message on the LCD panel when an unspecified memory card is inserted.
Some manufacturer’s memory card is not recognized in this camera.
We recommend SanDisk memory card, if possible.
You should change the memory card with SanDisk memory card.
Error messages
When the error message display
If the error message display in the middle of camera operation, turn the camera power off and turn the camera power on again.
If the error message display, the camera power is turned off automatically.
If the error message display continuously, format the memory card in PLAY mode and insert again.
99
SOFTWARE