Samsung EZ-DLENS039/E1 manual

Page 4
Take the lens out of the protective case or camera bag, and store it in a dry, well-ventilated place.
Avoid storing the lens in a poorly ventilated location such as a closet, wardrobe, drawer, vehicle, or where insect repellent or medicine is kept.
Avoid storing the lens in areas of high temperature and humidity, where there is a risk of mildew growth. Store the lens with a desiccant in a dry cabinet, airtight container, or plastic bag.
(Leaving a saturated desiccant in the storage container can cause damage to the lens. Be sure to read the instructions that come with the desiccant before use.)
Precautions and lens maintenance
Storage and mildew prevention

1.

2. The lens is not waterproof. When using the lens in a rain or mist, be careful not to allow it to get wet.

3. Never use any organic solvent such as thinner, alcohol, or benzine, etc. to remove dust on the lens.

4. The lens is a precise optical instrument. Be careful not to let it fall, or subject it to strong shocks or pressure. Use a cushion or similar pad to protect the lens from the vibrations of motorcycles or other vehicles, boats, etc.

5. Avoid subjecting the lens to rapid changes in temperature, otherwise condensation can occur on both the inside and the outside of the lens. Put the lens in a plastic bag or camera bag, and take it out after the lens has reached ambient temperature.

6. When the lens is not attached to the camera body, attach both the supplied lens cap and lens mountcap to protect it from dust.

7. Do not leave the camera with the lens cap off attached to a tripod or other rigid camera support. The inner parts of the camera can be damaged by direct sunlight.

8. Have the lens inspected by a dealer every one or two years to maintain its high performance.

03

Image 4
Contents Page Before use For safe use of your lens Page Contents Names of working parts LensAbout the lens mount KAF/KAF2 MountMounting and removing the lens To mount the lens on the camera bodyLens cap Removing the lens capFocusing Changing the focus mode Focusing with the OK Button Using Manual Focus Zoom ring Attaching the lens hood What is Vignetting? FiltersPrecautions when using the lens with a flash Built-in flashSpecifications Operating humidityFor customers in USA For customers in CanadaMemo Memo Memo AD68-02711A