PictBridge : Reset
■Initialises
1.Use the Up / Down buttons to select the [Reset] menu tab. And then press the Right button.
2.Use the Up / Down buttons to select the desired sub menu value, and then press the OK button.
If [No] is selected | : Settings will not be reset. |
If [Yes] is selected | : All print and image settings |
| will be reset. |
|
|
|
PICTBRIDGE |
| |
Layout |
| |
Type |
| |
Quality |
| |
Date |
| |
File | No | |
Reset | Yes | |
| Move | |
Important notes
Be sure to observe the following precautions!
■ This unit contains precision electronic components. Do not use or store this unit |
in the following locations. |
- Areas exposed to severe changes in temperature and humidity. |
- Areas exposed to dust and dirt. |
- Areas exposed to direct sunlight or the inside of a vehicle in hot weather. |
- Environments where there is high magnetism or excessive vibration. |
- Areas with high explosives or highly flammable materials. |
※Default print setting varies depending on the printer manufacturer.
For your printer’s default setting, refer to the user’s guide that came with your printer.
■ Do not leave this camera in places subject to dust, chemicals (like naphthalene |
and mothball), high temperature and high humidity. |
Keep this camera with silica gel in a hermetically sealed box when not planning |
to use the camera for a long period of time |
■ Sand can be particularly troublesome to cameras. |
- Do not let sand get inside the camera when using it on beaches, coastal |
dunes, or other areas where there is lots of sand. |
- Doing so may result in failure or may permanently render the camera unusable. |
■ Handling the camera |
- Never drop the camera or subject it to severe shocks or vibrations. |
- Protect the large size LCD monitor from an impact. When this camera is not |
used, keep it in the camera case. |
- Avoid obstructing the lens or the flash when you capture an image. |
- This camera is not waterproof. |
To avoid dangerous electrical shocks, never hold or operate the camera with |
wet hands. |
- If you use this camera in wet places, such as beach or pool, do not let water or |
sand get inside the camera. Doing so may result in failure or may permanently |
damage the unit. |
《73》