Samsung EC-PL55ZZBPSSA Connecting to a Power Source, SLB-10A rechargeable battery Specification

Connecting to a Power Source

You should use the rechargeable battery SLB-10A supplied with the camera. Be sure to charge the battery before using the camera.

SLB-10A rechargeable battery Specification

Model			SLB-10A
Type			Lithium lon
Capacity			1050mAh
Voltage			3.7V
Charging time			Approximately 180 Minutes
Number of images and battery life: Using the SLB-10A
		Battery life /			Conditions
	Number of images
					Using the fully charged battery, Auto
					mode, 12M image size, Fine image
	Approx. 160 MIN /				quality, Shot to shot interval: 30Sec.
Still image				Changing the zoom position between
	Approx. 320 shots				the Wide and the Tele after every shot.
					Using the flash on every second shot.
					Using the camera for 5 minutes and
					then powering it off for 1 minute.
					Using the fully charged battery
Movie	Approx. 125 MIN				640x480 image size
					30fps frame rate

ÄThese figures are measured under Samsung’s standard conditions and shooting conditions and may vary depending on the user’s methods.

Important information about battery usage. When camera is not in use, turn off the power.

Please remove the battery if the camera will not be used for long periods. Batteries can lose power over time and are prone to leaking if kept inside the camera.

Low temperatures (below 0°C) can affect the performance of the battery and you may experience reduced battery life. Batteries will usually recover at normal temperatures.

During extended use of the camera, the camera body may become warm. This is perfectly normal.

If you connect the AC adapter to the USB cable, you can use it as an AC cable and recharge the spare battery with it.

- Using an AC cable

: Connect the AC adapter to the USB cable. It can be used as a power cable.

- Using a USB cable

:Remove the AC adapter.You can download stored images to your

PC (p.91) or supply the power to your camera through the USB cable.

12