9Troubleshooting Guide
Screen issue
Issues | Solutions | |
|
| |
The power LED is off. The screen will not switch | Check that the power cable is connected | |
on. | properly. (Refer to "3.2 Connecting and Using a | |
| PC") | |
|
| |
The message Check Signal Cable appears. | Check that the cable is properly connected to the | |
| product. (Refer to "3.2 Connecting and Using a | |
| PC") | |
|
| |
| Check that the device connected to the product is | |
| powered on. | |
|
| |
Not Optimum Mode is displayed. | This message appears if the signal from the | |
| graphics card exceeds the maximum resolution or | |
| frequency for the product. | |
|
| |
| Change the maximum resolution and frequency to | |
| suit the product performance, referring to | |
| Standard Signal Mode Table (page 85). | |
|
| |
The images on the screen look distorted. | Check the cable connection to the product (Refer | |
| to "3.2 Connecting and Using a PC") | |
|
| |
The screen is not clear. The screen is blurry. | Adjust Coarse(page 59) and Fine(page 60). | |
|
| |
| Remove any accessories (video extension cable, | |
| etc.) and try again. | |
|
| |
| Set the resolution and frequency to the | |
| recommended level. (Refer to "10.2 Standard | |
| Signal Mode Table") | |
|
| |
The screen appears unstable and shaky. | Check that the resolution and frequency for the | |
| PC are within the range of resolution and | |
There are shadows or ghost images left on the | ||
frequency compatible with the product. Next, if | ||
screen. | ||
required, change the settings, referring to | ||
| ||
| Standard Signal Mode Table (page 85) in this | |
| manual and the INFORMATION menu on the | |
| product. | |
|
| |
The screen is too bright. The screen is too dark. | Adjust Brightness(page 48) and Contrast(page | |
| 49). | |
|
| |
Screen color is inconsistent. | Change the COLOR settings. | |
| (Refer to " Configuring Tint") | |
|
| |
The colors on the screen have a shadow and are | Change the COLOR settings. | |
distorted. | (Refer to " Configuring Tint") | |
| ||
|
| |
White does not really look white. | Change the COLOR settings. | |
| (Refer to " Configuring Tint") | |
|
|
9 Troubleshooting Guide 80