Samsung LS17BIDKSV/EDC, LS17BIDKSV/ILC manual Question

Page 48

card.

There is a message that reads "Unrecognized monitor, Plug & Play (VESA DDC) monitor found".

Have you installed the

Install the monitor driver according to the

monitor driver?

Driver Installation Instructions.

See the video card

Install the monitor driver according to the

manual to see if the

Driver Installation Instructions.

Plug & Play (VESA

 

DDC) function can be

 

supported.

 

Check when

MagicTune feature is

MagicTune does not

found only on PC (VGA)

function properly.

with Window OS that

 

supports Plug and Play.

MagicTune™ doesn't

Have you changed your

work properly.

PC or video graphic

 

card?

*To check whether your PC is available for MagicTune feature, follow the

steps below (When Windows is XP);

Control Panel -> Performance and Maintenance -> System -> Hardware -> Device Manager -> Monitors -> After deleting Plug and Play monitor, find 'Plug and Play monitor' by searching new Hardware.

MagicTune is an additional software for the monitor. Some graphic cards may not support your monitor. When you have a problem with the graphic card, visit our website to check the compatible graphic card list provided. http://www.samsung.com/monitor/magictune

Download the latest program. The program can be downloaded http://www.samsung.com/monitor/magictune.

Visit our website and download the installation software for MagicTune MAC.

Check the following items if there is trouble with the monitor.

1.Check if the power cord and the video cables are properly connected to the computer.

2.Check if the computer beeps more than 3 times when booting.

(If it does, request an after-service for the main board of the computer.)

3.If you installed a new video card or if you assembled the PC, check if the installed the adapter (video) driver and the monitor driver.

4.Check if the scanning ratio of the video screen is set at 56Hz ~ 75Hz. (Do not exceed 75Hz when using the maximum resolution.)

5.If you have problems in installing the adapter (video) driver, boot the computer in Safe Mode, remove the Display Adapter at the "Control Panel→System→Device Administrator" and then reboot the computer to reinstall the adapter (video) driver.

If problems repeatedly occur, contact an authorized service center.

Q & A

Question

Answer

How can I change the frequency?

Frequency can be changed by reconfiguring the video card.

Note that video card support can vary, depending on the version of the driver used. (Refer to the computer or the video card manual for details.)

How can I adjust the resolution? Windows ME/XP/2000 : Set the resolution at the Control Panel→Display→Settings.

Page 47 Page 49
Image 48
Page 47 Page 49
Contents SyncMaster 730BF / 930BF Notational Insert the power plug firmly so that it does not come loose Do not use a damaged or loose plugUse only a properly grounded plug and receptacle Do not drop the monitor when moving it Keep any heating devices away from the power cableDo not place the product on the floor Set down the monitor carefullyDo not place the monitor face down Do not spray water or detergent directly on the monitorDo not remove cover or back Do not cover the vents on the monitor cabinet Never insert anything metallic into the monitor openingsFalling product could cause physical damage even death Contact a local dealer to buy optional items Type a Monitor Bottom Type B ManualWarranty Card Users Guide Monitor Driver Quick Setup Guide Cable Sub Cable Power Cord Sold separately DVI CableNatural Color software MagicTune softwareGame SportDVI port Sub 15-pin portPage Monitor Assembly Attaching a BaseWindows ME Click Windows ME DriverWindows XP/2000 Click Windows XP/2000 DriverInstalling the Monitor Driver Manual Microsoft Windows XP Operating SystemPage How to install Click Start , Setting , Control Panel Microsoft Windows NT Operating SystemLinux Operating System How to install the Natural Color software Natural Color Software ProgramAuto Menu DescriptionMenuDescription OSD Lock & UnlockLocked unlocked Menu DescriptionSource Menu Description Play/Stop BrightnessMagicColor Color Tone Color Control Gamma Coarse Fine Sharpness Position DescriptionPlay/StopLanguage Position Transparency Display Time Auto Source Image Reset Color Reset Page Overview Installation Page Installationation Problems Hardware Reset CancelTo execute MagicRotation, it should be done as below Resolution BrightnessContrast MagicBrightColor Tone ControlMagicColorSharpness Zone Off Reset GammaImage Setup PositionSharpness PreferencesSource Select HelpAsset ID User NameHow multiple users can use adjusted color values Color CalibrationPage Uninstall Troubleshooting Symptom SolutionsWhen connecting D-Sub cable Connecting DVI cabelPanel → Display → Settings Question Self-Test Feature Check Useful Tips Resolution Input Signal, TerminatedPower Supply Signal CableDimensions WxDxH/ Weight State Normal Operation Power saving mode Power offVesa Mounting Interface Environmental considerationsDisplay Mode Frequency Pixel Clock Sync Polarity KHz MHz Horizontal FrequencyVertical Frequency Model Name SyncMaster 930BF Less than 38WAnalog/Digital Display Mode Frequency Pixel Clock Sync Polarity KHz MHz Chile Sonda S.A Germany Panama United KingdomResolution Dot PitchVertical Frequency Horizontal FrequencyAuthority What is Image retention ? Power Off, Screen Saver, or Power Save ModeSuggestions for specific applications
Related manuals
Manual 65 pages 8.48 Kb Manual 67 pages 62.25 Kb Manual 64 pages 58.93 Kb Manual 67 pages 60.75 Kb Manual 66 pages 39.92 Kb Manual 62 pages 51.02 Kb Manual 63 pages 58.85 Kb Manual 67 pages 3.85 Kb Manual 64 pages 31.18 Kb Manual 66 pages 1.95 Kb Manual 65 pages 63.59 Kb Manual 64 pages 42.28 Kb Manual 65 pages 23.11 Kb Manual 64 pages 12.49 Kb Manual 65 pages 38.37 Kb Manual 64 pages 1.05 Kb
Top Page Image Contents