Samsung LS17DOASST/EDC Contrast, Brightness, Cool Normal Warm Custom, Coarse, Fine, Sharpness

	Although the values are carefully chosen by our engineers, the
	pre-configured values may not be comfortable to your eyes
	depending on your taste.
	If this is the case, adjust the Brightness and Contrast by using
	the OSD menu.
Custom	You can use the on-screen menus to change the contrast and brightness
	according to personal preference.
	1) Contrast
	: Adjusts the Contrast.
	2) Brightness
	: Adjusts the Brightness.

If you adjust the picture by using Custom function, MagicBright will turn to the Custom mode.

Colour Tone

Colour

Control

The tone of the colour can be changed.

The individual colour DTVs are also user adjustable.

1)Cool

2)Normal

3)Warm

4)Custom

Adjusts the individual R, G, B Colour Controls.

1)Red

2)Green

3)Blue

If you adjust picture by using Colour Control function, Colour Tone will turn to the Custom mode.

Image Lock Image Lock is used to fine-tune and get the best image by removing noise that creates unstable images with jitter and shimmer. If satisfactory results are not obtained using the Fine adjustment, use the Coarse adjustment and then use Fine again.

1) Coarse

: Removes noise such as vertical stripes.

Coarse adjustment may move the screen image area. You may relocate it to the center using the Horizontal Control menu.

2) Fine

: Removes noise such as horizontal stripes.

If the noise persists even after Fine tuning, repeat it after adjusting the frequency (clock speed).

3) Sharpness

: Adjusts the picture sharpness.

4) Position

	: Adjusts the screen location horizontally and vertically.
Auto	The values of Fine, Coarse, Position are adjusted automatically.
Adjustment	By changing the resolution in the control panel, auto function is performed.
	- The direct button on the remote control is the 'AUTO/PRE-CH'
	button.

1)Coarse

2)Fine

3)Sharpness

4)Position

TV / Ext. / AV / S-Video Mode